1 / 28

An Introduction to CoSHH

An Introduction to CoSHH. (Control of Substances Hazardous to Health Regulations,2004). What is a hazardous substance under the Regulations?. Substances & mixtures classified as dangerous under CHIP – ( Chemicals (Hazard Information and Packaging for Supply) Regulations 2008  )

flann
Download Presentation

An Introduction to CoSHH

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. An Introduction to CoSHH (Control of Substances Hazardous to Health Regulations,2004)

  2. What is a hazardous substance under the Regulations? • Substances & mixtures classified as dangerous under CHIP – (Chemicals (Hazard Information and Packaging for Supply) Regulations 2008 ) • Substances with WELs (Workplace exposure limits) • Biological agents • Some dusts, especially in high concentrations • Other substances of comparable hazard

  3. What are NOT hazardous substances under CoSHH? • Lead and Asbestos (separate regulations) • Substances only hazardous due to: • Radio-activity • Simple asphyxiants • High pressure or extremes of temperature • Biological agents not connected with work • Eg Swine flu or catching a cold from a colleague • Labels are a good guide!

  4. What must an employer do? • Eliminate or reduce risks from hazardous substances • This is achieved by: • Risk assessment • Control measures • Monitoring health & exposure if necessary • Information, training and supervision

  5. What must an employee do? • Take reasonable care of our own safety and not endanger others • Cooperate with our employer • Make full and proper use of control measure Just reiterating our duties under HSAW

  6. Step 1 :Risk Assessment for CoSHH • Identify the hazardous substance(s) eg • Chemicals • Biological materials • Mixtures • Proprietary products • Reaction products and intermediates

  7. Step 1 :Risk Assessment for CoSHH New International Hazard Symbols Danger Flammable Oxidiser

  8. Step 1 :Risk Assessment for CoSHH New International Hazard Symbols Explosive Corrosive Compressed or liquefied gas

  9. Step 1 :Risk Assessment for CoSHH New International Hazard Symbols Aquatic Warning Sensitiser, carcinogen, Toxicity mutagen or teratogen

  10. OTHER SYMBOLS YOU MIGHT SEE – WHAT DO THEY MEAN?

  11. FLAMMABLE EXPLOSIVE HARMFUL TO THE ENVIRONMENT HIGHLY FLAMMABLE TOXIC IRRITANT / HARMFUL CORROSIVE VERY TOXIC OXIDISING BIOLOGICAL AGENT

  12. Step 1:Other sources of information • Use available data eg. • Data sheets & labels • Workplace exposure limits (WELs) – see Safety Services web site • On-line databases • Previous experience & publications (Especially for novel products)

  13. Step 1Decide who is at risk and how • Staff • Students • Others • Consider their current training (if any) and their background

  14. Step 1:Decide who is at risk and how • Inhalation • Skin or eye contamination • Ingestion • Injection

  15. Step 1:Evaluate the Risk Factors to Consider: • Toxicity • Form (gas, spray, dust, liquid, solid) • Solubility • Amount (weight &/or volume) • Nature of the operation • Length of exposure • Number of people involved OR

  16. Step 2: Decide on Control Measures • Control exposure in proportion to riskby using the hierarchy of controls. • Personal protective equipment should be a last resort as the prime means of control ?

  17. Step 3: Use of Control Measures (1) • Replace substance with a safer alternative • Eg use a lower hazard disinfectant rather than bleach (irritant) if it will do the job adequately

  18. Step 3: Use of Control Measures (2) • Use the material in a safer form eg: • Use water-based paint instead of solvent-based paint • Buy hazardous materials in pre-weighed sachets rather than having to measure & make-up from bulk quantities

  19. Step 3: Use of Control Measures (3) • Control the operation eg • Isolate the work • Control at source • Fume cupboard • Local exhaust ventilation • Reduce the number of workers • Reduce the frequency

  20. Step 3: Use of Control Measures (4) • Personal protective equipment as a last resort: • Protects only the worker & not others in the room • Training & maintenance required • Often not very comfortable

  21. Step 3: Use of Control Measures (5) • Good laboratory techniques is vital eg. • Labelling • Correct substance storage • Warning signs where appropriate • Cleanliness & tidiness • Correct waste disposal

  22. Step 4: Maintenance of control measures • Must be kept in good repair & working properly • Regular simple checks on airflow • LEV & fume cupboards must have engineering checks every 14 months • Records kept for 5 years

  23. Step 5:Monitor Exposure • Measure concentrations where assessment concludes that: • There is a serious risk if controls fail • Exposure limits may be exceeded • Control measures may not be working properly • Employees are involved in certain specific work in Schedule 5 (unlikely in the University apart from possibly use of vinyl chloride monomer) • Records must be kept for 5 years

  24. Step 6:Health Surveillance • Only required if: • Significant exposure of Schedule 6 processes (apart from vinyl chloride use, these are all manufacturing processes) • Likelihood of exposure to substances linked to specific diseases but only if: • There is a reasonable likelihood that this will occur • It is actually possible to detect the disease or effect • Records to be kept for 40 years

  25. Step 7: Derive safe working procedures • Preparation phase(eg weighing out) • The process itself • Safe waste disposal • Emergency procedures • Spillage • Fire • First aid

  26. Step 8:Workers must have adequate: • Information • Instruction • Training • Supervision • This will include the procedures themselves and what to do in an emergency

  27. Step 9:Check and review: • Are the control measures adequate? • Are they working correctly? • Is everyone aware of how to use them? • Have you the necessary equipment to deal with an emergency or malfunction?

  28. What now? • If you are working in a Science, Medicine or Engineering department, you should now find out the specific forms and methods used in your department for CoSHH assessments. • If you are working mainly with proprietary products (cleaning materials, lubricants, household chemicals etc), you may find it useful to complete the presentation on examining data sheets

More Related