1 / 10

Summary of the test structure design

Summary of the test structure design. Grudiev 14/04/2010. 11.424 GHz, <100 MV/m>, 100 ns, reg. cells. CLIC_vg1: undamped damped. edms#1065638. edms#1065641. edms#1065642. 50%. 41%. 47%.

gazit
Download Presentation

Summary of the test structure design

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Summary of the test structure design Grudiev 14/04/2010

  2. 11.424 GHz, <100 MV/m>, 100 ns, reg. cells CLIC_vg1: undamped damped edms#1065638 edms#1065641 edms#1065642 50% 41% 47% CLIC_G: undamped damped edms#1065640 edms#1065643 edms#1065646 18% 8% 13% A. Grudiev, 14/04/2010

  3. 11.994 GHz, <100 MV/m>, 100 ns, reg. cells CLIC_G: undamped damped edms#1068314 edms#1070498 edms#1069239 17% 8% 8% new A. Grudiev, 14/04/2010

  4. Preliminary Design of the Damping Load Will be used for CLIC module prototype and for a structure prototype for high power testing with damping load inside (TD24_vg1.8_diskR05_SiC) SiC properties from M.Luong, 1999 Tip size 1x1 mm Tip length 20 mm or 30 mm Base size 5.6 x 5 or 5.5 mm Base length 10 mm Waveguide width awd = 10.1 mm or 11 mm thick line: awg = 11mm, thin line: awg = 10.1 mm A. Grudiev, 14/04/2010

  5. Design of the damped compact coupler Will be used for CLIC module prototype and for a structure prototype for high power testing with damped compact coupler (TD26_vg1.8_diskR05_CC) A. Grudiev, 14/04/2010

  6. Beyond CLIC_G • A structure with a degree of tapering lower than TD18_vg2.6_disk (41%) and TD24_vg1.8_diskR05 (8%) is an interesting option • For example, ~ 20-25 % • It could also have bigger average aperture if CLIC main beam bunch charge can be increased accordingly. • A detailed optimization of the parameters and rf design will be done this year A. Grudiev, 14/04/2010

  7. Direct comparison of variation of d Direct comparison of variation of P/c Direct comparison of variation of a and P/c Test for a relatively large group velocity The test matrix (all structures in disks) R. Zennaro 2008 In red: 11.4 GHz new structures (C10) In blue: 30 GHz new structures (scaled values for a and d) (C30) Damped version? (*) not very different from input vg1 (d=2.79; a=4.06)

  8. C10 family • Aperture scan (un-damped cells) • C10_vg1.35 • C10_vg0.7 • Different damping geometry (damped cells with iris geometry from C10_vg1.35) • CD10_WDS • different materials are on hold • CD10_Choke (edms#1071742) • different choke gap will be investigated C10 family is still a valid approach because it is simpler and cheaper than a full scale tapered structure prototype. The main problem is lower priority so it goes very slow, much slower than tapered structures. (C10-paradox !) A. Grudiev, 14/04/2010

  9. Single-feed mode launcher Design for C10 structures E-field H-field -40dB BW 90 MHz A. Grudiev, 14/04/2010

  10. Quadrants/halves family HALVES Here T18_vg2.6_quad design is used. It has no slots. QUADs with SLOTS T18_vg2.6_Qslot design is used. It is the T18_vg2.6_quad but 4 slots of 0.2 mm rounded with 0.2mm radius are introduced. Corresponding frequency up-shift is ~1 MHz, well within tuning range. A. Grudiev, 14/04/2010

More Related