1 / 24

Lect# 7: Thermodynamics and Entropy

Lect# 7: Thermodynamics and Entropy. Reading: Zumdahl 10.2, 10.3 Outline: Isothermal processes (∆T = 0) Isothermal gas expansion and work(w) Reversible and irreversible processes. Isothermal Processes. Recall: Isothermal means D T = 0.

gil
Download Presentation

Lect# 7: Thermodynamics and Entropy

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Lect# 7: Thermodynamics and Entropy • Reading: Zumdahl 10.2, 10.3 • Outline: Isothermal processes (∆T = 0) Isothermal gas expansion and work(w) Reversible and irreversible processes

  2. Isothermal Processes • Recall: Isothermal means DT = 0. • Since DE = nCvDT, then DE = 0 for an isothermal process. • Since DE = q + w, then q = -w (isothermal process)

  3. Example: Isothermal Expansion Consider a mass (M) connected to a ideal gas confined by a piston. The piston is submerged in a constant T bath, so DT = 0.

  4. Initially, V = V1 P = P1 Pressure of gas is equal to that created by the pull of the hanging mass: P1 = force/area = M1g/A A = piston area g = gravitational acceleration (9.8 m/s2) Note: kg m-1 s-2 = 1 Pa

  5. One-Step Expansion: If we change the weight to M1/4, then the pressure becomes Pext = (M1/4)g/A = P1/4 The mass will be lifted until the internal pressure equals the external pressure, at which point Vfinal = 4V1 What work is done in this expansion? w = -PextDV = -P1/4 (4V1 - V1) = -3/4 P1V1

  6. What if we expand in two steps? In this expansion we go in two steps: Step 1: M1 to M1/2 Step 2: M1/2 to M1/4 In first step: Pext = P1/2, Vfinal = 2V1 w1 = -PextDV = -P1/2 (2V1 - V1) = -1/2 P1V1

  7. In Step 2 (M1/2 to M1/4 ): Pext = P1/4, Vfinal = 4V1 w2 = -PextDV =- P1/4 (4V1 - 2V1) = -1/2 P1V1 wtotal = w1 + w2 = -P1V1/2 - P1V1/2 = -P1V1 Note: wtotal,2 step > wtotal,1 step More work was done in the two-step expansion

  8. Graphically, we can envision this two-step process on a PV diagram: • Work is given by the area under the “PV” curve.

  9. Infinite Step Expansion Imagine that we perform a process in which we decrease the weight very slightly (∆M) between an infinite number of (reversible) expansions. Instead of determining the sum of work performed at each step to get wtotal, we can integrate:

  10. Graphically, see how much more work is done in the infinite-step expansion (red area) Reversible Two Step

  11. If we perform the integration from V1 to V2:

  12. Two Step Compression Now we will do the opposite, compress the fully expanded gas: Vinit = 4V1 Pinit = P1/4 Compress in two steps: first put on mass = M1/2, Then, in step two, replace mass M1/2 with a bigger mass M1

  13. In first step: w1 = -PextDV = -P1/2 (2V1 - 4V1) = P1V1 In second step: w2 = -PextDV = -P1 (V1 - 2V1) = P1V1 wtotal = w1 + w2 = 2P1V1 (see table 10.3)

  14. In two-step example: wexpan. = -P1V1 wcomp. = 2P1V1 wtotal = P1V1 qtotal = -P1V1 We have undergone a “cycle” where the system returns to the starting state. Compression/Expansion Since isothermal (DT = 0) then, DE = 0 but, q = -w ≠ 0

  15. Let’s consider the four- step cycle illustrated: 1: Isothermal expansion 2: Const V cooling 3: Isothermal compression 4: Const V heating Entropy: A Thermodynamic Definition

  16. Step 1: Isothermal Expansion at T = Thigh from V1 to V2 DT = 0, so DE = 0 and q = -w Do this expansion reversibly, so that

  17. Step 2: Const V cooling to T = Tlow. DV = 0, therefore, w = 0 q2 = DE = nCvDT = nCv(Tlow-Thigh)

  18. Step 3: Isothermal compression at T = Tlow from V2 to V1. Since DT = 0, then DE = 0 and q = -w Do compression reversibly, then

  19. Step 4: Const-V heating to T = Thigh. DV = 0, so, w = 0, and q4 = DE = nCvDT = nCv(Thigh-Tlow) = -q2

  20. The thermodynamic definition of entropy (finally!)

  21. Calculating Entropy: summary DT = 0 DV = 0 DP = 0

  22. Calculating Entropy: simple example Example: What is DS for the heating of a mole of a monatomic gas @constant volume from 298 K to 350 K? 3/2R

  23. Connecting with Lecture 6 • From this lecture: • Exactly the same as derived in the previous lecture!

More Related