1 / 26

SECTION 12.3

SECTION 12.3. DOUBLE INTEGRALS IN POLAR COORDINATES. DOUBLE INTEGRALS IN POLAR COORDINATES. Suppose that we want to evaluate a double integral , where R is one of the regions shown in Figure 1. DOUBLE INTEGRALS IN POLAR COORDINATES.

giles
Download Presentation

SECTION 12.3

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. SECTION 12.3 DOUBLE INTEGRALS IN POLAR COORDINATES

  2. DOUBLE INTEGRALS IN POLAR COORDINATES • Suppose that we want to evaluate a double integral , where R is one of the regions shown in Figure 1. 12.3

  3. DOUBLE INTEGRALS IN POLAR COORDINATES • In either case, the description of R in terms of rectangular coordinates is rather complicated but R is easily described by polar coordinates. 12.3

  4. DOUBLE INTEGRALS IN POLAR COORDINATES • Recall from Figure 2 that the polar coordinates (r, ) of a point are related to the rectangular coordinates (x, y) by the equations r2 = x2 + y2 x =r cos  y =r sin  12.3

  5. POLAR RECTANGLE • The regions in the first figure are special cases of a polar rectangleR = {(r, ) | a ≤r ≤b, a ≤ ≤b} shown in Figure 3. 12.3

  6. CHANGE TO POLAR COORDINATES IN A DOUBLE INTEGRAL If f is continuous on a polar rectangle R given by 0 ≤ a ≤ r ≤ b, a≤≤bwhere 0 ≤ b–a≤ 2p, then 12.3

  7. CHANGE TO POLAR COORDS. • Formula 2 says that we convert from rectangular to polar coordinates in a double integral by: • Writing x =r cos and y =r sin  • Using the appropriate limits of integration for r and  • Replacing dA by dr d 12.3

  8. CHANGE TO POLAR COORDS. • Be careful not to forget the additional factor r on the right side of Formula 2. 12.3

  9. CHANGE TO POLAR COORDS. • A classical method for remembering the formula is shown in Figure 5. • The “infinitesimal” polar rectangle can be thought of as an ordinary rectangle with dimensions r dand dr. • So, it has“area”dA =r dr d. 12.3

  10. Example 1 • Evaluate where R is the region in the upper half-plane bounded by the circles x2 + y2 = 1 and x2 + y2 = 4. 12.3

  11. Example 1 SOLUTION • The region R can be described as: R = {(x, y) | y ≥ 0, 1 ≤ x2 + y2 ≤ 4} • It is the half-ring shown in Figure 1(b). • In polar coordinates, it is given by: 1 ≤ r ≤ 2, 0 ≤ ≤ p 12.3

  12. Example 1 SOLUTION • Hence, by Formula 2, 12.3

  13. Example 1 SOLUTION 12.3

  14. Example 2 • Find the volume of the solid bounded by: • The plane z = 0 • The paraboloid z = 1 –x2–y2 12.3

  15. Example 2 SOLUTION • If we put z = 0 in the equation of the paraboloid, we get x2 + y2= 1. • This means that the plane intersects the paraboloid in the circle x2 + y2= 1. 12.3

  16. Example 2 SOLUTION • So, the solid lies under the paraboloid and above the circular disk D given by x2 + y2≤ 1. 12.3

  17. Example 2 SOLUTION • In polar coordinates, D is given by 0 ≤r ≤ 1, 0 ≤ ≤ 2p. • As 1 –x2–y2 = 1 –r2, the volume is: 12.3

  18. Example 2 SOLUTION • Had we used rectangular coordinates instead, we would have obtained: • This is not easy to evaluate because it involves finding ∫(1 –x2)3/2 dx 12.3

  19. CHANGE TO POLAR COORDS. • What we have done so far can be extended to the more complicated type of region shown in Figure 7. • It’s similar to the type II rectangular regions considered in Section 12.2. 12.3

  20. Formula 3 If f is continuous on a polar region of the form D = {(r, ) | a≤ ≤ b, h1( ) ≤r ≤h2()}then 12.3

  21. CHANGE TO POLAR COORDS. • In particular, taking f(x, y) = 1, h1() = 0, and h2() = h() in the formula, we see that the area of the region D bounded by  = a,  = b, and r = h() is: • This agrees with Formula 3 in Section 9.4 12.3

  22. Example 3 • Find the volume of the solid that lies: • Under the paraboloid z =x2 + y2 • Above the xy-plane • Inside the cylinder x2 + y2 = 2x 12.3

  23. Example 3 SOLUTION • The solid lies above the disk D whose boundary circle has equation x2 + y2 = 2x. • After completing the square, that is:(x – 1)2 + y2 = 1. • See Figure 8 and 9. 12.3

  24. Example 3 SOLUTION • In polar coordinates, we have: x2 + y2 = r2 and x =r cos  • So,the boundary circle becomes: r2 = 2r cos or r = 2 cos  • Thus, the disk D is given by:D = {(r, ) | –p/2 ≤  ≤ p/2 , 0 ≤ r ≤ 2 cos } 12.3

  25. Example 3 SOLUTION • So, by Formula 3, we have: 12.3

  26. Example 3 SOLUTION 12.3

More Related