1 / 10

Mack T-8 Reference Data draft 6

Mack T-8 Reference Data draft 6. September 9, 2011 Jim Rutherford. Process. Calculate initial 1004-3 targets and standard deviations arithmetically from all (13) 1998 tests at labs G and J. Apply LTMS V2 up to start of 1005-2 (June 2007)

gratia
Download Presentation

Mack T-8 Reference Data draft 6

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Mack T-8 Reference Datadraft 6 September 9, 2011 Jim Rutherford

  2. Process • Calculate initial 1004-3 targets and standard deviations arithmetically from all (13) 1998 tests at labs G and J. • Apply LTMS V2 up to start of 1005-2 (June 2007) • Apply severity adjustment from step 2 to 1005 target data set and calculate targets and standard deviations. Using all 1005-2 (10) tests (debatable): • Using 1005-2 targets above, run EWMA through 1005-2 and 1005-3. Calculate targets and standard deviations for 1005-3 as least squared means from severity adjusted results:

  3. Process (continued) • Current Zi = ICF + sa. If sa=0 (debatable): • We could debate what belongs in 1005 target data sets and the relationship between ICF and severity adjustments. It seems with this analysis that rather than ICF, we should use new 1005-3 targets and continuous (no threshold) severity adjustments.

  4. Filter Settings - CHART: ( Y)

  5. Filter Settings - LTMSLAB: ( G , J ) - CHART: ( Y)

  6. Filter Settings - LTMSLAB: ( G , J ) - CHART: ( Y)

  7. Filter Settings - CHART: ( Y)

  8. Filter Settings - LTMSLAB: ( G , J ) - CHART: ( Y)

  9. Filter Settings - CHART: ( Y)

  10. Filter Settings - LTMSLAB: ( G , J ) - CHART: ( Y)

More Related