1 / 11

Electrical Hazards Awareness Briefing Excavation and Trenching Module 5

Electrical Hazards Awareness Briefing Excavation and Trenching Module 5. These tools must be used with care!. A laborer was burned and rendered unconscious when his jackhammer hit a buried 13,200 volt electrical power cable. Serious Injury at DOE Site when 13.2kV Cable Struck.

gusty
Download Presentation

Electrical Hazards Awareness Briefing Excavation and Trenching Module 5

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Electrical Hazards Awareness BriefingExcavation and TrenchingModule 5 EFCOG Electrical Improvement Project

  2. These tools must be used with care! EFCOG Electrical Improvement Project

  3. A laborer was burned and rendered unconscious when his jackhammer hit a buried 13,200 volt electrical power cable. Serious Injury at DOE Site when 13.2kV Cable Struck EFCOG Electrical Improvement Project

  4. Typical Tasks That Expose Personnel to Underground Power Lines • Construction site excavation • Jack-hammering • Well drilling • Landscaping • Trenching for piping • Fence installation EFCOG Electrical Improvement Project

  5. Excavation Program Elements • Designate a Competent Person to oversee all excavation jobs and train to understand the electrical hazard • Use written excavation procedure and excavation permit • Require an excavation/trenching checklist to be used in job planning • Require non-intrusive surveys of areas and develop an interference map of area • Ensure excavation planning requirements flow down to subcontractors EFCOG Electrical Improvement Project

  6. Electrical Hazard Identification • Perform detailed drawing and map review including original site drawings and recent project drawings • Understand that drawings and maps, however, may not be up to date or indicate all field routings correctly • Perform walk-down of site surrounding the excavation area and look for conduits and raceways that extend underground and could cross into the excavation work zone • Discuss excavation area with facility site knowledge • Look for new asphalt, manholes not marked on prints or disturbed soil to identify potential for unmarked interferences EFCOG Electrical Improvement Project

  7. Field Investigation • Perform non-intrusive surveys of excavation area using trained and certified utility locators • Mark surface with interferences and verify immediately prior to start of excavation • Know limitations of non-intrusive equipment • GPR has been off target by 3 feet and may not identify some interferences • Voltage proximity detectors are shielded by ground wire or conduit • Current proximity detectors will not detect if electrical load is turned off EFCOG Electrical Improvement Project

  8. Identifying Interferences • De-energize and lockout known electrical hazards-Don’t let schedule and convenience take precedent. • Hand excavate interferences within excavation limits • Look for different types of soil in the excavation area or for colored concrete that may indicate presence of underground electrical line • Consider use of vacuum excavation technology for uncovering interferences • Use caution when hand digging-even shovels and post hole diggers can damage direct burial cables EFCOG Electrical Improvement Project

  9. Identifying Interferences • Use appropriate PPE (voltage rated gloves and footwear) when identifying electrical interferences • PPE is important since detection of hidden utilities can not always be guaranteed • Use double-insulated electrical tools • Use fiberglass-insulated shovels and picks when excavating by hand • Use rubber mats as appropriate EFCOG Electrical Improvement Project

  10. Other Safe Practices • Stop work and call a time out if an unidentified obstruction is found during excavation • Revise maps and drawings to reflect actual found field conditions before closing excavation permit • Consider use of electronic drill stops when drilling in concrete (DOE Electrical Safety Handbook Section 11) • Observe all Power Line Right of Ways and notify power company prior to excavation EFCOG Electrical Improvement Project

  11. Conclusion • Remember, you can avoid the pain and suffering that can happen when you contact an underground energized electrical power line • Implement and follow the practices in this module • Stop work when in doubt EFCOG Electrical Improvement Project

More Related