1 / 13

Sinusoidal Pulse-Width Modulation

Sinusoidal Pulse-Width Modulation. In multiple-pulse modulation, all pulses are the same width Vary the pulse width according to the amplitude of a sine wave evaluated at the center of the same pulse. Generate the gating signal. 2 Reference Signals, v r , -v r.

hakan
Download Presentation

Sinusoidal Pulse-Width Modulation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Sinusoidal Pulse-Width Modulation • In multiple-pulse modulation, all pulses are the same width • Vary the pulse width according to the amplitude of a sine wave evaluated at the center of the same pulse ECE 442 Power Electronics

  2. Generate the gating signal 2 Reference Signals, vr, -vr ECE 442 Power Electronics

  3. Comparing the carrier and reference signals • Generate g1 signal by comparison with vr • Generate g4 signal by comparison with -vr ECE 442 Power Electronics

  4. Comparing the carrier and reference signals ECE 442 Power Electronics

  5. Potential problem if Q1 and Q4 try to turn ON at the same time! ECE 442 Power Electronics

  6. If we prevent the problem Output voltage is low when g1 and g4 are both high ECE 442 Power Electronics

  7. This composite signal is difficult to generate ECE 442 Power Electronics

  8. Generate the same gate pulses with one sine wave ECE 442 Power Electronics

  9. Alternate scheme ECE 442 Power Electronics

  10. rms output voltage • Depends on the modulation index, M Where δm is the width of the mth pulse ECE 442 Power Electronics

  11. Fourier coefficients of the output voltage ECE 442 Power Electronics

  12. Harmonic Profile ECE 442 Power Electronics

  13. Compare with multiple-pulse case for p=5 Distortion Factor is considerably less ECE 442 Power Electronics

More Related