1 / 27

Magnaflux Quasar PCRT

Magnaflux Quasar PCRT. Topics. Functional Quality Magnaflux Quasar PCRT Detection Sensitivity System & Applications. Functional Quality. Definition of Quality Visual Quality – rejects parts with visual indications that exceed specifications (subjective)

hawa
Download Presentation

Magnaflux Quasar PCRT

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Magnaflux QuasarPCRT

  2. Topics • Functional Quality • Magnaflux Quasar PCRT • Detection Sensitivity • System & Applications

  3. Functional Quality • Definition of Quality • Visual Quality – rejects parts with visual indications that exceed specifications (subjective) • Functional Quality – rejects parts with structural degradation that will cause premature field failure (objective) • Functional Quality Requires NDT that: • Measures structural properties • Provides results that are traceable to failure levels • Provides quantitative and objective reject criteria • Resonance Inspection is the only NDT method that meets these requirements

  4. Resonance Theory Applied to NDT • Resonant Frequencies are determined by the dimensions and material properties of the whole part fr = resonant frequency k = stiffness (e.g., Young’s Modulus) m = mass (dimensions, density) • Structural Defect = strength reduction caused by degraded material properties or dimensional variation • …therefore, a defect that reduces stiffness will shift the resonant frequency

  5. Experimental Verification Break Force vs. Resonant Frequency for PM Exhaust Flange

  6. Process Variations Can Mask Defects Good Rod 1 Small Defect 1 Large Defect 1 Good Rod 2 Small Defect 2 Large Defect 2 Good Rod 3 Small Defect 3 Large Defect 3

  7. Statistical Analysis of Masking

  8. Relative Frequency Compensation Good Parts Peak Separation > 2.8 kHz Bad Parts Peak Separation < 2.0 kHz Silicon Nitride Valves

  9. Temperature Compensation • Critical for accurate measurements • Quasar total error 0.03% • Resonant frequency varies with temperature • Ferrous – 0.015% per °C • Aluminum – 0.025% per °C • Compensation measures part temperature (+/- 0.5°C) and computes equivalent frequency at baseline temperature 23°C 68.400 kHz 31°C 68.318 kHz 23°C 68.397 kHz Compensation Accuracy = 99.995%

  10. Process Compensation Unmasks Defects Distribution of Predictor Error for 200 Aluminum Master Cylinders

  11. Process Compensated Resonance Testing • Resonance tests the whole part for all structural defects, material differences, and dimensional changes • Process Compensation separates changes due to defects from those caused by normal process variations • ASTM E2001-08 (RI) and ASTM E2534-10 (PCRT) • Quasar PCRT takes the next step by applying statistical analysis and pattern recognition to accept or reject parts • NDT acceptance is based on objective functional quality, not visual quality subject to operator error

  12. MTS Pattern Recognition MTS = Mahalanobis Taguchi System MTS Acceptance Window Measured & Predicted Resonant Frequencies for 200 Aluminum Master Cylinder Bodies

  13. Reject MTS Cutoff Accept Accept Reject Bias Cutoff VIPR – Pattern Recognition Program Bad Parts Good Parts VIPR computes the MTS (good part characteristics) and Bias (bad part characteristics) to determine Quasar Score

  14. Quasar Score Predicts Performance

  15. Detection Sensitivity • Common question: • What size is the smallest defect that quasar can detect? • Correct question: • How much performance degradation can quasar detect? • Answer – detection threshold depends on several variables: • Definition of defect – statistically significant difference • Defects must be structural, not cosmetic • Failure distribution must be statistically defined • Measurement R&R (precision, temperature, tooling) • Available test time vs. Weight & complexity of part

  16. Consortium Test of NDT Methods 88% Effective 55% Effective 56% Effective 59% Effective 100% Effective Fatigue Test of 64 Aluminum Knuckles

  17. Quasar 4200 System Test Station Work Station Flat Panel Display Nest Keyboard & Mouse Test Heads Computer & Transciever Isolation Base

  18. Receive Transducers (2) Proximity Switch Drive Transducer User Interface Thermocouple Part Control Computer Transceiver Accept/Reject PLC DeviceNet System UPM Workstation Quasar 4000 System Block Diagram Step Motor Lift TEST HEAD ID Automation Interface • PLC • Senses Part • Raise / Lower • Test Results Test Station

  19. Test Head Example Tooling Test Part (Dampening Fork) Thermocouple (Under part) Transducers(Under part)

  20. Resonant Vibration Modes Test Part (Connecting Rod) Bending Mode Transverse Bending Mode Torsional Mode Click for animation

  21. Before Quasar PCRI NDT Opns. 8 Visual Inspect X-Ray Sample Machine/ Heat Treat Cast MPI 2 MPI 1 NDT Cost 20% of Price Scrap 7% Pack / Ship “Gas Hole” Inspection Final Visual Second Level Inspection Visual Cracks Autogage Returns ~100/yr After Quasar PCRI NDT Opns. 3 Pack / Ship Machine/ Heat Treat Final Visual Rough Inspect NDT Cost 4% of Price Cast Autogage Quasar Scrap 1% Returns 0 Application Example #1 Rocker Arm

  22. Application Example #2 2 year Production Log Cast Aluminum Master Cylinders 2 suppliers – 12 million parts Leakers occur when aluminum oxides provide a channel from bore to surface

  23. Quasar Production Systems

  24. Examples of Quasar PCRI Applications

  25. Examples of Structural Defects Common Defects – All Processes Cracks, Inclusions, Chemistry, Missing Features, Non-fill, Dimensions Process-Specific Defects Other Processes – Welding, Ceramics, Composites

  26. Quasar PCRI – Production NDT Benefits • Lower Risk • Lower probability of shipping defective parts • Proper use reduces the risk of “quality spills” into the field • Boost company marketing image • Lower Cost • Reduced NDT Cost • Reduced false-rejects and scrap of good parts • Reduced returns and warranty costs associated with “quality spills”

  27. Magnaflux Quasar Systems The Next Step in NDT www.magnaflux.com Magnaflux Quasar Systems 5550 Midway Park Place NE Albuquerque, NM 87109 Phone: (877) 847-3067 Fax: (505) 212-5422 Magnaflux Global HQ 3624 West Lake Avenue Glenview, IL 60025 Phone: (847) 657-5300 Fax: (847) 657-5388

More Related