1 / 0

Current Works

Current Works. Soldered pins onto IMU, XBee breakout board, and 3.3V regulator Successfully powered XBee off of 2 AA batteries using the voltage regulator Configured and tested serial communication between 2 XBees. Current Test Setup. XBee A/D Conversion problems.

hedva
Download Presentation

Current Works

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Current Works Soldered pins onto IMU, XBee breakout board, and 3.3V regulator Successfully powered XBee off of 2 AA batteries using the voltage regulator Configured and tested serial communication between 2 XBees
  2. Current Test Setup
  3. XBee A/D Conversion problems Only 4 pins for input- going to need more because IMU has 5 outputs Could be solved by using a MUX Can only read voltages between 0 volts and 1.2 volts- voltages can be scaled down using resistors but will lose some precision Future testing needed with IMU to determine how significant this problem is XBee freezes up whenever the required A/D firmware is downloaded Possible solution- use Microprocessor to perform A/D conversion and send to XBee using serial communication Microchip offers free samples of their microprocessors and there are small chips specializing in A/D conversions
  4. What’s Next? Begin testing accelerometer and gyroscope output on IMU with the assistance of MobileStudioBoard Determine output range If Xbee conversion will be precise relative to results form IMU testing, continue researching and programming Xbee to perform A/D conversions Research other A/D conversion chips/microprocessors
More Related