1 / 20

WLTP-E-Lab Sub Group Progress report WLTP-DTP-E-LabProc-066

WLTP-DTP-10-10. WLTP-E-Lab Sub Group Progress report WLTP-DTP-E-LabProc-066. Leader: Per Ohlund / Kazuki Kobayashi. Open issues. State of E-lab sub group activity from DTP #9 in April. 1. gtr draft study (to be reported by drafting coordinator) 2.Preparation for Validation Phase 2

holt
Download Presentation

WLTP-E-Lab Sub Group Progress report WLTP-DTP-E-LabProc-066

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. WLTP-DTP-10-10 WLTP-E-Lab Sub GroupProgress reportWLTP-DTP-E-LabProc-066 Leader: Per Ohlund / Kazuki Kobayashi

  2. Open issues State of E-lab sub group activity from DTP #9 in April 1.gtr draft study (to be reported by drafting coordinator) 2.Preparation for Validation Phase 2 Test matrix:ACEA-LabProc-EV-TestMatrix_VP2_08052012 Test guidance:WLTP-DTP-E-LabProc-065_Parameter_for_Validation2_V2.ppt Color means state of each issue on Open issue list 17 open Issues are To be discussed 2 (UF, Battery charging time) =>To be discussed during V2 Depends on new cycle 1 ( AE city for Low speed EV) => To be discussed during V2 Depends on Validation results 5 (ex,EV range, CD /CS test,)=>TBD after V2 Follow ICE group 3 (R/L, multi gear box, Runin mileage )

  3. Proposed actions for gtr development test sequence Parameter set Procedure for V2 Draft gtr1 Modify gtr Draft gtr2 WLTC completed reflection Short V1 Confirmation Validation 2 Road map will be revised Round Robin [ Background ] 1. Draft gtr 1 is the portion exclude Validation phase 2. 2. Some of open issues need to be evaluated during the validation program. 3. Draft gtr 2 is reflected the result of Validation 2 .

  4. Preparation Validation Phase2 in JAPAN Test vehicles Schedule

  5. Consideration items on E-Lab. Gr. CO2/FC calculation (PL8/10) Performance of Watt-hour meter, Am-meter (PL3) Multi mode gear box (PL11) Termination condition for EV range (PL6/7) Charging voltage 100 / 200V (PL12) End of charge criteria (PL1) Order of CD/CS (PL4) Interruption condition (PL5) RCB break off criteria (PL2/9) ◆Test flow (independent test for L/M/H/ExH) Charge sustaining (CS) mode test (cold) Charge depleting (CD) mode test Charge sustaining (CS) mode test (hot) Soak 12~36 hr Precondition Plug OFF Discharge within 1hr Prepare RCB measurement Battery condition [Ah} ⊿E ⊿E Soak 2 Options 12~36hr 6hr 25+/-2 AER EAER RCDR Full charge max. 12 hr Pre-con cycle CD mode×n CS cold CS hot Full charge Day 1 Day 2 (EV: Day 1) Day 3 (EV: Day 2) *) RCB: RESS Charge Balance (=SOC) *) RESS: Rechargeable energy storage system *) AER: All Electric Range *) EAER: Equivalent All Electric Range *) RCDR: Charge Depleting Range *) NEC: Net Energy Change = RCB * nominal voltage of RESS Confirm tire pressure Prepare RCB measurement

  6. OVC-HEVNumber of test ※No.7: Impossible to conduct due to a lot of tests

  7. ∆RCB (Ah) CO2/Fuel consumption/Additional pollutants) Start End Cycle EU) ECE101 Annex8 0 Charge(-) ∆RCB (Ah) NOVC-HEV Number of test Appendix: RCB Compensation OIL No.27RCB correction criteria ±x%of fuel energy? Start Discharge(+)

  8. BEV Number of test ※No.7: Impossible to conduct due to a lot of tests

  9. Appendix:Open issues • Green color means “agreed or deleted” • White color means “to be discussed “. • Yellow color means “ to be evaluated in Validation phase 2”. • Blue color means “proposed”.

  10. Unknown SOC Cold start of ICE Performance of Watt-hour meter, Am-meter OIL No.15,16,17 Charging Condition Battery [Ah] Validation test

  11. OIL.10bis 1hr End of charge criteria Charge complete Plug off Test start (OIL10) Validation test

  12. 1h max from Alternative Fully Charged plug off (in case of charge and CD test has start of CD to be retested) : Charge Depleting Range RCDA ICE Spak precondition time+ battery charge All Electric Range ing at chronologica Equivalent All Electric Range Charging Condition [Ah] l separation from step 1 and 2 First start of ICE Test n Test n+1 Test 1 Test 2 Driving cycle [/] (transcient) (needed for calculations) CO RCDA calculated with k factor 2 Recharge Recharging 12h max 12h max CO avg CD CO Transcient CO hot CS 2 2 2 36h soak max OIL.No31 Low power vehicle What is Low power vehicle? How to validate? To be raised DTP level

  13. Detailed calculation formula is developed based on validation test results. Pollutants : CO2/Fuel Consumption : Range :

  14. 1.0 JPN (EU) US OIL No.1: WLTP UF SAE 1711 with Opt.1) based on reagional data Opt.2) based on worldwide data 0.5 US: SAE J1711 with US data JPN: SAE J1711 with JPN dataEU: CS weight is 25km (fixed) Utility Factor 25 OVCrange (km) To be discussed later stage

  15. Annex: Open issue list 1

  16. Open issue list2

  17. Open issue list3

  18. Open issue list4

  19. Open issue list5

  20. Open issue list 6

More Related