1 / 10

LED UFO High Bay Light – FS|HighBay|iPromise

LED UFO High Bay Light.The product is suitable for factories, workshops, warehouses, toll stations, gas stations, stadiums, big supermarkets, exhibition halls, commercial buildings, stadium halls, parking buildings, etc.

ipromiseaustralia
Download Presentation

LED UFO High Bay Light – FS|HighBay|iPromise

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. LED UFO High Bay Light – FS FEATURES Cold forging process, high stability High limen efficient and colour rendering No flickering, non-dazzling, high brightness Long life span, 5 year warranty OEM available

  2. DIMENSIONS (UNIT: MM) 80W/100W/120W 150W

  3. TECHNICAL SPECIFICATIONS

  4. ENVIRONMENTAL PARAMETER HUMIDITY RANGE OPERATING TEMPERATURE RANGE OPERATING -40°c to 50°c 10% to 80% TEMPERATURE RANGE STORAGE HUMIDITY RANGE STORAGE -25°c to 65°c 10% to 80%

  5. PLANE ISOLUX CURVE & ILLUMINATION CONE CURVE 100W

  6. 120W

  7. 150W

  8. 200W

  9. MODEL UL-H80/100/120W-FS UL-H150W-FS CTN SIZE 760X220X305 MM 835X230X350 MM PACKING GW 12.0 KG 13.5 KG QTY/CTN 4 PCS 4 PCS

  10. 1. Insulation resistance: The IR shall be at least 50MΩ when apply 500Vdc between primary and secondary 2. Dielectric Strength (Hi-pot): COMPLIANCE AND STANDARDS: Input To Output 3750Vac 60Hz 1 minute <3MA: When AC voltage of 3.750kV is applied, and the voltage applied to the insulation under test is gradually raised from zero to the prescribed voltage in 1s, and held at that value for 60s between the inputs and output. Between the input and housing, the current sensitivity shall be less than 5mA. After this test, the adapter shall exhibit no electrical and mechanical abnormalities. 3. Leakage Current: The leakage current shall be less than 0.25mA for class II when power supply is operated maximum input voltage and maximum load. Source

More Related