1 / 26

MAD-X V3 with Space Charge via Macros (2010) Benchmarking (GSI) with other Codes

Frozen space charge model in MAD-X with adaptive intensity and sigma calculation. on behalf of V. Kapin Acknowledgement: Y. Alexahin, G. Franchetti, F. Schmidt, P. Zenkevich. MAD-X V3 with Space Charge via Macros (2010) Benchmarking (GSI) with other Codes

irving
Download Presentation

MAD-X V3 with Space Charge via Macros (2010) Benchmarking (GSI) with other Codes

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Frozen space charge model in MAD-X with adaptive intensity and sigma calculation on behalf of V. Kapin Acknowledgement: Y. Alexahin, G. Franchetti, F. Schmidt, P. Zenkevich • MAD-X V3 with Space Charge via Macros(2010) • Benchmarking (GSI)with other Codes • Implementing Space Charge directly into MADX-SC V5 (2012) latest version (2013) by MAD-X custodian Laurent Deniau • Application to the FermilabDebuncher and comparison with ORBIT

  2. MAD-X V3 with Space Charge for debuncher (Valery Kapin 2010) • Utilizing the BB elements to create a frozen space charge model but adapting emittances and Twiss parameters for the sigma determination. • Using the MAD-XMacro technique for all operations • Phase-I: Lattice Preparation • Splitting the elements (at least once) and introduce SC kicks in between • Making sure that the lattice is stable including SC and proper sigma values ( next slide) • Transferring thick lattices into thin ones (symplectic and only way to track in MAD-X) • Phase-II: Running (turn-by-turn due to Macro procedures) • Time varying fields • Emittance and TWISS calculation during run • Output (losses, emittances, etc) SC-13

  3. The 2nd order ray tracing integrator for a number of S-C kicks SC-13

  4. Procedure to determine Beam Sizeswith large SC Tune Swings • TWISS fails for integer and/or half integer tunes  • Trick to avoid it: turn on SC tune-shift in small steps and let tunes converge at each step • Lines represent Laslett formula Reference: Valery Kapin talk at GSI 2009 SC-13

  5. Y.Alexahin, A.Drozhdin, N.Kazarinov, “direct space charge in Booster with MAD8”, Beams-doc-2609-v1, 2007 Number of particle Beam emittance Red – horizontal, blue – vertical Unfortunately TRACK module of MAD8 (frozen, only executable file) does not permit to have more than 200 BB elements. Thereby the particle tracking has been fulfilled with 197 BB elements with average distance between ~ to 2.4 m.

  6. Y.Alexahin, A.Drozhdin, N.Kazarinov, “direct space charge in Booster with MAD8”, Beams-doc-2609-v1 1) direct space charge in MAD using set of BEAMBEAM (BB) elements. Tune shift: where β – the Twissbeta-function at BB location, K – kick acting on the particle, Nbb – number of BB elements. 2) The number of particle N  in fictitious colliding beam must be set as: Here Bf – bunching factor, N – number of particle, C – circumference, Li – distance between successive BB elements,  – relativistic factor. 3) Simulation with changing emittance from turn to turn of the beam. The emittance have been evaluated by fitting the integral of distribution function with: Fit at the first turn where I – is action variable.

  7. Self-consistent (linear) BB-sizes Space-charge kicks simulated by the 1st order MATRIX for linear TWISS calculations; Linearly self-consistent beam sizes calculated by iterations with the TWISS; Analytical Laslett's formula and numerical iterations provide near the same tune shifts (for coasting beam !!!) SC-13

  8. BB-sizes for 6D simulations Conte & MacKay, “Intro to Phys. Part. Acc”, 1991, 5.5 Dispersion: trajectories x(s) is composed of two parts: betatron oscillations xb(s) , and particular solution due to dispersionxD(s)=D(s)dp. Statistically beam size is s2tot= s2b + [D(s) sp]2 Beam size in bends (Dx0)is increased for beam with sp SC-13

  9. Tracking with many BB in 6D S.C. kicks by BB-elements for non-linear tracking; (C.O. shifts are included; a total number BB-elements is not limited); Thin-lens tracking with MADX (similar to MAD8) with lattice conversion by MAKETHIN command Transverse BB-forces are modulated according to longitudinal Gaussian distribution. Two versions: a) given “fake” harmonical oscillations (GSI- 2009) b) DT from real 6D tracking (FNAL-2010) SC-13

  10. Benchmarking with 4D & 6D simulations using MADX + Sp.Ch.for SIS18 model(GSI, 2009)vs.G. Franchetti (GSI), MICROMAPS. Machida (RAL), SIMPSON G. Franchetti, “Code Benchmarking on Space Charge Induced Trapping”: http://www-linux.gsi.de/~giuliano/ SC-13

  11. Benchmarking SIS18 steps 1-5 for 4D 1) Benchmarking of the Phase Space MADX with BBs SC-13

  12. 2) Benchmarking of the tunes versus particle amplitude. Sextupole OFF. SC-13

  13. 3) Benchmarking of the tunes versus particle amplitude, with sextupole ON. SC-13

  14. 4) Benchmarking of the Tunes versus particle amplitude, with sextupole ON SC-13

  15. 5) Benchmarking of phase space with space charge and sextupole on at Qx = 4.3504 MAD-X with BB’s SIMPSONS MICROMAP SC-13

  16. 6) Benchmarking SIS18 for 6D (fake longitudinal motion) Evolution of the transverse rms emittance of a bunch (1000particles) Trapping test particle during 1 synchrotron oscillation SC-13

  17. MADX_SC V5 (2012) • The MACRO technique of MAD-X is working fine but typically one ends up with very complex logic so that even I (Valery) had to work hard to re-understand them after a delay of 2 years!  Therefore quite unpractical for new applications. • Macros are inherently slow! • Therefore the idea was to reduce the use of Macros as much as possible and to modify the code to do most of the work directly within MAD-X. • In detail: • Time varying multipoles • Time varying phase trombone (Forest/Schmidt: Don’t use them!) • Time varying cavity voltage • Include the sigma determination at each turn • Allow for stop&go for the MAD-X tracking routine to allow intermediate TWISS calculation at start and the location of the SC elements • Input via several TFS tables. SC-13

  18. MAD-X Status • Frank have left the MAD-X project 2 years ago. • Laurent Deniau at CERN has taken over till then. • Frank has been a manager of the code with limited involvement in the actual code writing other than the PTC part. In particular, the core of the code in C has been written exclusively by Hans Grote. • In a state of emergencyFrank had to be ready to fix the code quickly. • MAD-X is not well suited for this task since deferred evaluation does not easily allowto put element parameters back into the database. • Various C routines were needed but Hans did not have to help! SC-13

  19. Lattice with variable Parameters M.J.Syphers, “Status of Mu2e Operating Scenario”, Feb, 2010 Beams-doc-3556 • Mu2e experiment • Accelerator issue: 8 GeV Accumulator and Debuncher storage rings are used • Compact bunches (<200ns, Dn<0.025) are prepared in Accumulator ring • Bunches are transferred to Debuncher ring and extracted out to the experiment using 3-rd order resonant extraction with spill times ~150ms. A stable, slow spill with a very intense proton beamis a big challenge. SC-13

  20. N_macro_surv vs Turn Number for the Debuncher • Timing on CERN computer • Macro version ~20-24h • MADX-5sp • ~2-4h SC-13

  21. Ex,y_rms vs Turn Number for the Debuncher SC-13

  22. Longitudinal Emittance vs Turn Number for the Debuncher SC-13

  23. Slow extraction in Debuncher using Orbit • Simulations with Orbit code (PIC + matrices) by V.Nagaslaev • 3-order resonance with variable tune Qx and sext. str. K2 • First “strange” results for extraction: “intensity drop” intensity vs turns Need to simulate in a lattice with variable parameters (Qx, K2)

  24. Simulation Tasks: • Compare MADX and ORBIT space-charge simulations using the Debuncher lattice in ORBIT(6x6matr.)-style(created by V.Nagaslaev) • Compare simulations for lattices with MAD-style (MAD-8 -> MADX) and ORBIT-style (6x6 matr.) • Valery’s task was the code validations and comparisons. • The design of slow extraction is used “as is” and out of his scope. • “Intensity drop” was resolved simply at the beginning: I advised to make mesh refinements PIC: “Total Beam size increases at slow extraction => mesh number should be increased to keep the cell size” SC-13

  25. Simulations with ORBIT by VN Ramps are given in tables; Npart in bunch ~ 2.5e12 SC-13

  26. Future Developments • MADX-5sc is going to be used at CERN as their frozen model tool for space charge studies. Any developments, bugfixes etc will be provided to Fermilab. Most probable I (Valery Kapin) and Yuri Alexahinwill use it and CERN will hopefully help in case of problems and/or further developments. • There has already been request by both BNL and GSI to apply it for their machines. Code, examples and help has been offered by CERN. • In the meantime the code has been implemented into the latest version of MAD-X but a careful checking remains to be done. • Documentation will soon be provided  responsibility F. Schmidt SC-13

More Related