1 / 11

Product Introductions

Product Introductions. Z-Audio. SMART-HDL. Features. SD card music playing Internal FM Radio External audio input FTP music playing. Connection diagrams. Connection diagrams. Programming. Step1: find your Z-Audio from S-BUS

jaunie
Download Presentation

Product Introductions

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ProductIntroductions Z-Audio SMART-HDL

  2. Features • SD card music playing • Internal FM Radio • External audio input • FTP music playing

  3. Connection diagrams

  4. Connection diagrams

  5. Programming Step1: find your Z-Audio from S-BUS A SD-card (format by FAT32) is needed to insert into the Z-Audio before power on.

  6. Programming Step2: check IP address ,Route IP and Port setting(Port: 6000 is a default factory setting, not need to modification ) Make sure that the IP of Z-Audio, PC, 1PROT are in the same network segment (e.g. 192.168.10.*).

  7. Programming Step3: Refresh Playlists Create folders in SD-card, and save mp3 music files in these folders, each folder is a playlist in Z-audio, and Z-Audio can only play the music files which were saved in folders.

  8. Programming Step4: Functions’ select and Radio Settings Enabled function(s) will be shown on the DLP’ music page.

  9. Programming Step5: FTP setting(need to install a FTP server for Z-Audio ). After FTP setting, please refresh the playlists on ‘Playing Music Setting’ Label.

  10. Programming Step6: Programming on Z-Audio finished. Step7: Set on DLP’s Music page label, add Z-Audio’s subnet ID and device ID, and Zone No.(Zone No.: each DLP can control 24 Z-Audio, so DLP has 24 Zone No. for Z-Audio control.)

  11. Play Music with DLP Key1 left: press to shift audio source (long press to play settings ) right: PLAY/PAUSE Key2 Previous/Next playlist Key3 Previous/Next song Key4 Volume increase/decrease Key5 to shift function pages

More Related