1 / 11

Cost Saving Report Month : Oct 2013

ZANVAR GROUP Tooling Department. Cost Saving Report Month : Oct 2013. SHRIRAM FOUNDRY LTD. MACHINE SHOP. Zanvar group of industries. SHRIRAM FOUNDRY LTD. MACHINE SHOP. CO ORDINATOR :- Prashant Dhoolappanavar Tool Engineer :- . Mr.P.J.Reagde

jeb
Download Presentation

Cost Saving Report Month : Oct 2013

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. ZANVAR GROUPTooling Department Cost Saving Report Month : Oct 2013 SHRIRAM FOUNDRY LTD. MACHINE SHOP Zanvar group of industries

  2. SHRIRAM FOUNDRY LTD. MACHINE SHOP • CO ORDINATOR :- Prashant Dhoolappanavar • Tool Engineer:-. Mr.P.J.Reagde Mr. Atul Chalke Mr. Vijay Jagdale Mr .PreetamPatil Zanvar group of industries

  3. SHRIRAM FOUNDRY LTD. MACHINE SHOP SELECTION OF PROJECT • To reduce Tool cost per component. • To reduce setting time • To reduce operator fatigue. Zanvar group of industries

  4. SHRIRAM FOUNDRY LTD. MACHINE SHOP PROJECT : 01 • Unit : Alka Enginering Work. • Component :Clutch Housing. • Tool Engineer : Atul Chalke. Zanvar group of industries

  5. SHRIRAM FOUNDRY LTD. MACHINE SHOP SHRIRAM FOUNDRY LTD. MACHINE SHOP Zanvar group of industries

  6. SHRIRAM FOUNDRY LTD. MACHINE SHOP DATA COLLECTION Previous Tool Cost Per Component in Rs. & Tool Life • Ø80 Finish Milling Cutter • Insert:- HNHX 1006 ANTN –MM TT6300 • Tool Cost/Component : - 28.7 Rs.. • Tool Life/INSERT : - 20 JOB • New Tool Cost Per Component in Rs. & Tool Life • Ø80 Finish Milling Cutter • Insert:-HNCF 1006 TT6300 • Tool Cost/Component : - 13.6 Rs.. • Tool Life/INSERT : - 23 JOB Zanvar group of industries

  7. SHRIRAM FOUNDRY LTD. MACHINE SHOP Saved cost per component Rs:-15.1/-` TO

  8. SHRIRAM FOUNDRY LTD. MACHINE SHOP Saved per component Life 3 job TO

  9. SHRIRAM FOUNDRY LTD. MACHINE SHOP Conclusion Tool cost is saved by15.1rupees per component Zanvar group of industries

  10. SHRIRAM FOUNDRY LTD. MACHINE SHOP Thank - You Zanvar group of industries

More Related