1 / 23

Testing treatment combinations versus the corresponding monotherapies in clinical trials

Testing treatment combinations versus the corresponding monotherapies in clinical trials. Ekkekhard Glimm, Novartis Pharma AG 8th Tartu Conference on Multivariate Statistics Tartu, Estonia, 29 June 2007. Setting the scene (I). The problem

jersey
Download Presentation

Testing treatment combinations versus the corresponding monotherapies in clinical trials

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Testing treatment combinations versus the corresponding monotherapies in clinical trials Ekkekhard Glimm, Novartis Pharma AG 8th Tartu Conference on Multivariate Statistics Tartu, Estonia, 29 June 2007

  2. Setting the scene (I) The problem • Two monotherapies available for the treatment of a disease • Question: Does a combination / simultaneous administration of the treatments („combination“) have a benefit? Might be • synergism ( positive interaction between monos) • a way to overcome dose limitations of monos 2 | Testing treatment combinations | Ekkehard Glimm | 29 June 2007

  3. Setting the scene (II) Ultimate task is to find if the best combination therapydose is better than the best dose of any of the monos. Frequent problem in clinical trials (e.g. hypertension treatment) A lot of literature on the topic: • Laska and Meisner (1989) • Sarkar, Snapinn and Wang (1995) • Hung (2000) • Chuang-Stein, Stryszak, Dmitrienko and Offen (2007) 3 | Testing treatment combinations | Ekkehard Glimm | 29 June 2007

  4. vs Setting the scene (III) Limited goal in this talk: • Only two monotherapies • Optimal doses are known Let A, B be the monotherapies, AB their combination. Assume n individuals per treatment group with response 4 | Testing treatment combinations | Ekkehard Glimm | 29 June 2007

  5. Min Test (I) Laska and Meisner (1989): Reject H0 if min(Z1, Z2)>u1- (with u1- N(0,1)-quantile). Note: Assumption of known is just for convenience, min-t-test is also possible. Same with equal n’s. 5 | Testing treatment combinations | Ekkehard Glimm | 29 June 2007

  6. is the cdf of where Min Test (II) Rejection probability of this test: This test is uniformly most powerful in the class of monotone tests (= tests whose teststatistic is a monotone function of Z1 and Z2). 6 | Testing treatment combinations | Ekkehard Glimm | 29 June 2007

  7. Min Test (III) The Min test is „conservative“: Let AB = B > A and Then the null rejection probability is The „least favorable constellation“ under H0 is δ→∞ with But at nominal =0.05! 7 | Testing treatment combinations | Ekkehard Glimm | 29 June 2007

  8. Laska and Meisner Min Test (IV) Is there a way to alleviate this conservatism? 8 | Testing treatment combinations | Ekkehard Glimm | 29 June 2007

  9. „Conditional“ tests Tests uniformly more powerful (UMP) than the Min test can be derived, if we adjust the critical value based on the observed difference In general such tests are of the form: Reject if To be UMP than the Min test, a sufficient condition is: and keeping a is attainable. 9 | Testing treatment combinations | Ekkehard Glimm | 29 June 2007

  10. Sarkar et al. test Suggestion by Sarkar et al. (1995): Reject if k, d such that -level is kept. • The null rejection prob. r0can be written as a function of bivariate normal cdfs. • The derivative can be written as a function of bivariate normal cdfs and pdfs. • Using these two components, we can let the computer search for d corresponding to given k (or vice versa). 10 | Testing treatment combinations | Ekkehard Glimm | 29 June 2007

  11. What can be inferred about the derivative • . As δ from 0,  for all δ< some δ+. • For δ→∞: → 0. • There is either no or one δ* where . If there is, for  < * and for  > *, so r0has a maximum in*. 11 | Testing treatment combinations | Ekkehard Glimm | 29 June 2007

  12. Some remarks on computer implementation • k is fixed. • For given d, calculate atd = 4.5If this is <0, decrease d. • Stop if Idea: If the conditionshold,  0. d = 4.5 is „close enough“ to . This approach finds d within a few steps. 12 | Testing treatment combinations | Ekkehard Glimm | 29 June 2007

  13. Modified Suggestion: linearized conditional test Reject if • With this, it is also possible to write down the rejection prob r0and its derivative • Need to find k,c and d. To limit options, k=0 andc= u1/d were assumed, so just search for d. • Same search algorithm as before. • For non-linear c(|V|), I did not try to work out r0 (maybe possible for special functions). 13 | Testing treatment combinations | Ekkehard Glimm | 29 June 2007

  14. Rejection probability of conditional tests • Rejection probability is highest at max d which has k =  • Once k > , power relatively quickly  min test as d  14 | Testing treatment combinations | Ekkehard Glimm | 29 June 2007

  15. More Modifications With both variants, we may want to allow • r0 approaches a value < as δ→∞. • Resulting test is no longer UMP than min test, but • we gain more power (in the vicinity of H0) for small δ. Here, k, d, c areeven easier to find: The max r0 is at δwhere 15 | Testing treatment combinations | Ekkehard Glimm | 29 June 2007

  16. More Modifications: „Maximin test“ Idea: Find c(|V|) such that r0(0)=r0(∞). This test maximizes the minimum rejection probability among all conditional tests. Results: Sarkar test with k=0: d=0.08025, c=1.767  r0(0)=r0(∞)=0.0386. Linearized test with k=0: d=0.2125, c=8.539, c=1.81  r0(0)=r0(∞)=0.0348. 16 | Testing treatment combinations | Ekkehard Glimm | 29 June 2007

  17. Rejection probability of „maximin“ test (k=0) 17 | Testing treatment combinations | Ekkehard Glimm | 29 June 2007

  18. A remark on the power of conditional tests Suppose These tests do not dominate each other. As  and δincrease, the tests with large k, d overtake tests with small k, d. Unfortunately, „real gains“ coincide with low power: Power gain over Min test (all at δ= 0): •  =0.8: k=0: 10.4%; Min test: 8.7% (max absolute gain, 1.73%) •  =2:k=0: 49.2%; Min test: 48.3% •  =2.8:k=1.3: 79.9%; Min test: 79.6% •  =3: k=1.5: 85.4%; Min test: 85.2% 18 | Testing treatment combinations | Ekkehard Glimm | 29 June 2007

  19. A few remarks on generalizations • Unequal n‘s: No problem. • The  in the bivariate Normal distribution changes, so k, c and d change, but approach remains the same. • Estimated s instead of known  :In principle, same approach. • Rejection prob a sum of bivariate t-rather thannormal cdfs. • Basic idea for constructing a UMP conditional test works the same. • k, c and d can be found by a grid search. • > 2 monos:Again, in principle same approach, but gets messy: • more than one δto be considered. • Generalization of rule „if |V|< d“ to V1, ..., Vg not obvious. 19 | Testing treatment combinations | Ekkehard Glimm | 29 June 2007

  20. Contentious issues about conditional tests • If we allow k<0, it is possible that we identify the combi as superior, although its observed average is lower than the better of the monos. → This can be avoided by requiring k  0. • Non-monotonicity: It can happen thatrejects, but does not, although (However, we should keep in mind: The power never only depends on 20 | Testing treatment combinations | Ekkehard Glimm | 29 June 2007

  21. Conclusions • „Conditional“ non-monotone tests are UMP than the Laska-Meisner min test. • There is not that much to be gained: • The power depends on .  Even for modest n, the region where the min test‘s r0m<<  is very small. E.g. n=8, (B  A)/ =1 has r0m = 0.0471. • d is also very small. Only if the monotherapies arereally similar, this makes a difference. 21 | Testing treatment combinations | Ekkehard Glimm | 29 June 2007

  22. Conclusions • Power profile is primarily driven by choice of k, irrespective of the variant of the conditional test. • Gains over the Min test are in the „wrong places“: • They are where power is low (10%). Here, small values of k are best. • At powers that matter to the pharma industry, „biggest“ gains are achieved for large k, but are generally very small (<<1%). • k and d are easy to obtain with a relatively simple search algorithm on a computer. • In practice, we‘ll rarely experience a difference from the Min test (with k=0, P( |V|<d |=0)=2.6%). 22 | Testing treatment combinations | Ekkehard Glimm | 29 June 2007

  23. Literature Laska, E.M. and Meisner, M. (1989): Testing whether an identified treatment is best. Biometrics45, 1139-1151. Hung, H.M.J. (2000): Evaluation of a combination drug with multiple doses in unbalanced factorial design clinical trials. Statistics in Medicine19, 2079-2087. Sarkar, S.K., Snapinn, S., and Wang, W. (1995): On improving the min test for the analysis of combination drug trials. Journal of Statistical Computation and Simulation51, 197-213. Chuang-Stein, C., Stryszak, P., Dmitrienko, A., Offen, W. (2007): Challenge of multiple co-primary endpoints: a new approach. Statistics in Medicine 26, 1181-1192. 23 | Testing treatment combinations | Ekkehard Glimm | 29 June 2007

More Related