1 / 10

Dust Accelerator: Review of Plan

Dust Accelerator: Review of Plan. 3 MeV dust accelerator Particle sizes: 0.2 – 2.5  m Particle velocities: < 100 km/s Large test chamber UV sources Solar wind simulator Various targets Small (UHV) test chamber Microphysics diagnostics Additional 20 kV ‘mini’ accelerator

jmorford
Download Presentation

Dust Accelerator: Review of Plan

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Dust Accelerator: Review of Plan • 3 MeV dust accelerator • Particle sizes: 0.2 – 2.5 m • Particle velocities: < 100 km/s • Large test chamber • UV sources • Solar wind simulator • Various targets • Small (UHV) test chamber • Microphysics diagnostics • Additional 20 kV ‘mini’ accelerator • Prototype dust head, detectors, etc.

  2. Pelletron in NPL high bay

  3. Nuclear Physics Laboratory Status • Office Space • Repainted 12 offices + lab/sample-prep areas • Students presently working at NPL • Two electronics labs set up so far • High Bay • Power installed (Pelletron, pumps, lamps, etc.) • Compressed air installed (incl. compressor) • Water lines installed (no chiller yet) • All work so far from Facilities Management (not CCLDAS project budget)

  4. Nuclear Physics Laboratory Status • Crane • New CU effort to bring campus to OSHA standards • $150k from Provost funds to refurbish NPL crane • Electrical power & Mechanical / bearings • Soft start/stop • Remote control • Remaining NPL items (near term) • Rework last few offices • Set up videoconferencing system in library • Finish data lines to high bay • Water chiller • Minor electrical work

  5. Pelletron Bid Status • University RFP process nearing completion • One bid received [National Electrostatics / Pelletron] • Lead-time is now 16 months!

  6. Accelerator Beamline

  7. Beamline Mechanical Structure

  8. Subcomponents Underway • Detector mechanical fab. CU Physics shop • Dust-head mechanical fab. CU Physics shop • Detector circuitry Evan Thomas (thanks to Gunter Matt) • Beamline mechanical fab.Spencer Leblanc • PSU logic Tyler Wingfield • Pulser & HV electronics Mike Wagner & Anthony Shu • Fiber-optic readout/control M. Wagner & A. Shu • SimIon / focusing electrodeMatt Zemel

  9. Small (20 kV) Accelerator • Designed in parallel with large beamline • Components being ordered now • Electronics built in parallel with large accelerator versions • Should be complete/operational in Fall

  10. Near-term Action Items • Get Pelletron order out the door • Beamline hardware • Once HV unit is ordered, beamline can be constructed • NPL facility items from previous slide • Bring up small accelerator as quickly as possible

More Related