1 / 25

Scout Pro Training

Scout Pro Training. The Ohaus Scout Pro. Introducing the Scout Pro Portable Balance: 7 Models From 200g x 0.01g to 6000g x 1g 5 Application Modes Optional USB or RS232 Interface Accessory w/cable Density/Specific Gravity Determination with Below Balance Hook

johnmgonzales
Download Presentation

Scout Pro Training

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Scout Pro Training

  2. The Ohaus Scout Pro • Introducing the Scout Pro Portable Balance: • 7 Models From 200g x 0.01g to 6000g x 1g • 5 Application Modes • Optional USB or RS232 Interface Accessory w/cable • Density/Specific Gravity Determination with Below Balance Hook • Battery or AC Power (Power Pack Included) • Integral Security Bracket • Programmable Energy Saving Auto Shut-off

  3. Shipping lock Secures load cell Unpack & Setup • Battery Installation • 4 AA batteries provide 40 hours of operation

  4. AC plug Unpack & Setup • Security bracket

  5. Unpack & Setup • USB Accessory • RS232 Accessory

  6. Unpack & Setup • Rotate square pans counter clockwise • Insert round pans

  7. Turn balance on Scout Pro is shipped ready to operate in all available weighing units, parts counting and percent weighing 0.00g ON/ZERO Off 0.00g ON/ZERO Off PRINT Unit Operation PRINT Unit • Short press to print. • Long press to switch weighing unit.

  8. Weigh in any unit OFF ON/ZERO Off PRINT Unit Operation • Hold Off until “OFF” is displayed, then release to turn off.

  9. With balance off, hold ON/ZERO until MENU is displayed MENU ON/ZERO Off PRINT Unit C.A.L. ON/ZERO Off PRINT Unit C.A.L. S.E.t.U.P. U.n.I.t. E.n.d. Menus and Calibration • Release ON/ZERO to enter the menu

  10. PRINT Unit PRINT Unit PRINT Unit PRINT Unit C.A.L. S.E.t.U.P. U.n.I.t. E.n.d. Auto-Off Linearity cal Mode - Display Hold - Totalize - Off End Menu System Calibration g kg oz lb PC - Count - Cnt. Enh - Off % End

  11. Access calibration ON/ZERO Off ON/ZERO Off Calibration C.A.L. - C - C 2 0 0 g • Add cal weight - C - d o n E

  12. Parts Counting & Parts Counting Setup • Mode: Parts Counting • This mode allows the user to count based on the average weight of an original reference sample • This mode is enabled by setting “PC” to “Count” in the “.U.n.i.t.” part of the menu • To set-up mode: • Enter Menu Mode, press PRINT/Unit to go to “.U.n.i.t.” and then press ON/ZERO/Off • Press PRINT/Unit to go to “UnitS PC” and then press ON/ZERO/Off • Press PRINT/Unit to go to “Count” and then press ON/ZERO/Off • Press PRINT/Unit to go to “End” and then press ON/ZERO/Off • Press PRINT/Unit to go to “.E.n.d.” and then press ON/ZERO/Off • Sample Sizes -- • The Scout Pro allows the user to change the sample size with a press of the Print/Unit key

  13. EnhancedParts Counting • Mode: Enhanced Parts Counting • APW Enhancement -- • The Scout Pro allows the user to turn-on automatic recalculation of the average piece weight (APW Optimization) -- this is the same function as found in Trooper Count and Ranger Count • Without Optimization, the APW is the average of the weight of the sample, divided by the number of pieces in the sample -- if the user needs a sample of 100, they have to count by hand 100 pieces! • With Optimization, the APW is the average of the weight of the initial sample as well as any subsequent samples -- the user can reach a sample of 100 by adding parts on the pan 10 at a time, increasing accuracy!

  14. Enhanced PartsCounting Setup • Mode: Enhanced Parts Counting • This mode is enabled by setting “PC” to “Cnt.Enh” in the “.U.n.i.t.” part of the menu • To set-up mode: • Enter Menu Mode, press PRINT/Unit to go to “.U.n.i.t.” and then press ON/ZERO/Off • Press PRINT/Unit to go to “UnitS PC” and then press ON/ZERO/Off • Press PRINT/Unit to go to “Cnt.Enh” and then press ON/ZERO/Off • Press PRINT/Unit to go to “End” and then press ON/ZERO/Off • Press PRINT/Unit to go to “.E.n.d.” and then press ON/ZERO/Off • Sample Sizes -- • The Scout Pro allows the user to change the sample size with a press of the Print/Unit key

  15. 0 . 0 0 g PRINT Unit PRINT Unit PC ON/ZERO Off ON/ZERO Off CLr.APu Put 5 Parts Counting Operation • Place a container • Press and hold PRINT/Unit key until “PC” is indicated • Display will then show “Clr.APu” • Press Print/Units to use the average piece (APW) stored in memory (if there is one) • To re-establish a new APW, press On/Zero/Off once • Scout Pro will display “Put 10”. To select a different sample size, press Print/Unit • Place displayed number of pieces in container and press ON/ZERO/Off • Scout Pro will calculate APW and display total count • To reset APW, press Print/Unit until “PC” is displayed again 5 PC

  16. Percent Weighing % • Mode: Percent Weighing • This mode allows the user to display the weight of a sample as a percentage of a reference weight • The reference weight is placed on the pan first, and equals 100% • Each reference weight will be a percentage from 0.1% to 99,999.9%, depending on the Capacity X Readability of the scale -- most users will use 1.0% to 200.0% at the most • Applications: Formulation and compounding, weight checking

  17. Percent Weighing % Setup • Mode: Percent Weighing • This mode is enabled by setting “%” to “On” in the “.U.n.i.t.” part of the menu • To set-up mode: • Enter Menu Mode, press PRINT/Unit to go to “.U.n.i.t.” and then press ON/ZERO/Off • Press PRINT/Unit to go to “UnitS %” and then press ON/ZERO/Off • Press PRINT/Unit to go to “On %” and then press ON/ZERO/Off • Press PRINT/Unit to go to “End” and then press ON/ZERO/Off • Press PRINT/Unit to go to “.E.n.d.” and then press ON/ZERO/Off

  18. PRINT Unit PRINT Unit % ON/ZERO Off ON/ZERO Off ON/ZERO Off CLr.rEF PutrEF 123.45 g 1 0 0 % Percent Operation • Press and hold Print/Unit key until “%” is indicated • Display will then show “Clr.Ref” • Press Print/Units to use target weight in memory (if there is one) • To enter a new target weight, press On/Zero/Off once • Scout Pro will display “Put.rEF” • Place target weight on pan, press On/Zero/Off again -- Scout Pro will display target weight value • Press On/Zero/Off again -- Scout Pro will display 100% • To reset target weight, press Print/Unit until “%” is displayed again 2 5 %

  19. Display Hold • Mode: Display Hold • This mode allows the user to hold the highest stable weight on the display until manually cleared • Display Hold can work with any weighing unit or mode -- including % or parts counting -- except Totalization • The Scout Pro will show the current measurement on the pan with a flashing stability indicator “*” • Applications: Postal and shipping 0.00 Display Hold

  20. Display Hold Setup • Mode: Display Hold • This mode is enabled by selecting “HoLd” in the “MOde” part of the “S.E.t.U.P” menu • To set-up mode: • Enter Menu Mode, press PRINT/Unit to go to “S.E.t.U.P” and then press ON/ZERO/Off • Press PRINT/Unit to go to “MOdE” and then press ON/ZERO/Off • Press PRINT/Unit to go to “HoLd” and then press ON/ZERO/Off • Press PRINT/Unit to go to “End” and then press ON/ZERO/Off • Press PRINT/Unit to go to “.E.n.d.” and then press ON/ZERO/Off 0.00 Display Hold

  21. Hold PRINT Unit ON/ZERO Off HLd.OFF Display Hold Operation • To Use Mode: • Press PRINT/Unit once to start Display Hold • “HoLd” will be displayed briefly indicating Display Hold is active • Place weight on pan • “*” will flash indicating highest stable weight value will be held • Take weight of pan • The display will change and then display the Hold value with the flashing “*” • To Clear Display press On/Zero/Off • To Exit Mode hold ON/ZERO/Off until “HLdOFF” is displayed  123.45 g  123.45 g 0.00 Display Hold

  22. Totalization • Mode: Totalization • This mode allows the user to sum a series of weights -- up to the limit of the display (999,999) • Totalization can work with any weighing unit or mode -- including % or parts counting -- except Display Hold • Once you are in Totalization, you cannot change weighing units/modes without exiting Totalization • The Scout Pro will show the current measurement on the pan with a solid “t”, and then the total as a flashing “t” • Applications: Formulation and compounding, parts kitting Σ Totalization

  23. Totalization Setup • Mode: Totalization • This mode is enabled by selecting “totAL” in the “MOde” part of the “S.E.t.U.P” menu • To set-up mode: • Enter Menu Mode, press PRINT/Unit to go to “S.E.t.U.P” and then press ON/ZERO/Off • Press PRINT/Unit to go to “MOdE” and then press ON/ZERO/Off • Press PRINT/Unit to go to “totAL” and then press ON/ZERO/Off • Press PRINT/Unit to go to “End” and then press ON/ZERO/Off • Press PRINT/Unit to go to “.E.n.d.” and then press ON/ZERO/Off Σ Totalization

  24. t o t A L PRINT Unit PRINT Unit ON/ZERO Off tot.OFF Totalization Operation PREPARATION: 2 plastic cups, different colored water samples. Tare an empty cup • Press PRINT/Unit once to start Totalization • “totAL” will be displayed briefly and “t” will be displayed indicating Totalization is active • Place a sample on the pan and press PRINT/Unit to enter the weight into memory • “t” will flash indicating total weight. • Remove the sample. “t” will stop flashing and the balance will return to zero • Repeat the procedure with another sample and read the totalized weight • To exit Totalization, hold down ON/ZERO until “tot.OFF” is displayed 0.00 g t 123.45 g t 0.00 g t Σ Totalization

  25. The Ohaus Scout Pro • Scout Pro USP’s • Mechanical overload and shock load protection • Protects weighing cell 4 times better than Scout II • Simple 2-button operation – 5 applications and 7 weighing units • Optional USB or RS232 interfaces, simply insert the module; cable included

More Related