1 / 16

 13 Readout Electronics

 13 Readout Electronics. A First Look 28-Jan-2004. Requirements. Digitize charge seen by each PMT Energy reconstruction Provide timing of signal for each PMT Position reconstruction Provide trigger for DAQ Physics triggers Neutrinos (prompt EM energy, delayed neutron energy)

jonco
Download Presentation

 13 Readout Electronics

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 13 Readout Electronics A First Look 28-Jan-2004

  2. Requirements • Digitize charge seen by each PMT • Energy reconstruction • Provide timing of signal for each PMT • Position reconstruction • Provide trigger for DAQ • Physics triggers • Neutrinos (prompt EM energy, delayed neutron energy) • Backgrounds (to study and subtract) • Muons • Electronic calibration triggers (test pulses) • Source/laser/LED calibration triggers • Random triggers J. Pilcher

  3. Comparisons • KamLAND is important reference point • Same reaction channel • Scintillator-based detector • Recent design • But much larger target volume • ~20 times larger • KamLAND resolutions • Energy • 7.5% / Sqrt[E(MeV)]  2%  5.7% at 2 MeV • Position • 25cm  5 cm • timing resolution 2.0 ns RMS after charge correction J. Pilcher

  4. KamLAND Electronics • Berkeley Analog Waveform Transient Digitizer (AWTD) • For 1325 PMTs (32% coverage) • Sample every 1.5ns • For signals above 1/3 pe • 3 gain ranges (0.5, 4, 20) • Store analog samples in switched capacitor arrays until trigger • 128 samples deep (200 ns) • 10-bit ADC • ~15 bit dynamic range • Converts 128 samples in 25s. J. Pilcher

  5. Channel Response Characteristics J. Pilcher

  6. KamLAND Signals 128 samples of 1.5ns 3 gain scales (most events just use 20X scale) Gain 1/2 Gain 4X Gain 20X J. Pilcher

  7. KamLAND Vertex Reconstruction • Calibrate timing of individual PMT channels with variable laser pulses at center of detector • Time offsets • T vs Q • Measure performance for physics with sources along z-axis J. Pilcher

  8. KamLAND Vertex Reconstruction • Mean reconstructed position depends on photon energy • Apply energy dependent correction J. Pilcher

  9. KamLAND Energy Reconstruction • Set gains of PMTs using LEDs • Equalize 1 pe peaks to 184 counts • Must correct for variations in storage capacitors • All signals converted to equivalent photoelectrons • Convert to energy using calibration sources J. Pilcher

  10. KamLAND Energy Reconstruction J. Pilcher

  11. Fresh look at Readout Electronics • Avoid ASICs if possible (local bias) • Long development time • Not cost effective in small volume • Do not profit from evolution of chips in the commercial sector • Main advantage size and possibly performance and functionality • Continued performance growth in commercial ADCs and FPGAs (PLD) • Popular building blocks for many applications J. Pilcher

  12. Fresh look at Readout Electronics • Does one need detailed pulse shape for E and t? • Pulse shape discrimination can resolve photons from neutrons • Depends on scintillator • Some exhibit this property and some do not • May depend on light collection from target • Reflections could obscure the effect • Much simpler if one can do shaping of input signal • Output amplitude proportional to input charge • Can be done with passive elements (no noise added) J. Pilcher

  13. ATLAS TileCal Approach • For ATLAS TileCal 20 ns PMT signals converted into 50-ns-wide standard shape • Amplitude proportional to input charge • Slower signal can be handled by commercial ADCs (+40 megasamples per second) • Analysis process fits shape to extract amplitude and time J. Pilcher

  14. Performance of TileCal System Time reconstruction is excellent amplitude independent J. Pilcher

  15. Alternatives • Use LBNL AWTD • Likely if they join the collaboration • Possibly an updated version • Build a system based on a flash ADC • Eg. Maxim MAX1151 • 8 bit flash • 750 MHz (sample every 1.3 ns) • Power 5.5W each • Need 3 per PMT for dynamic range • Use 40 MHz “system” clock à la LHC • Easy to distribute on optical fiber if LHC hardware used • Generate local vernier clock synced to system clock • Tale 16 samples for every 25 ns period of system J. Pilcher

  16. Alternatives • Build integrating system as in TileCal • The next steps • Test LHC system reading out scintillator test cell • Look at pulse shape discrimination with test cell • Continue to think about electronics • Trigger • Can it be derived from digital data, thereby avoiding a second signal branch • Consult with Harold J. Pilcher

More Related