1 / 6

Press and release the "GO" button.

Channel Programming Instructions for ResponseCard RF. Press and release the "GO" button. Channel Programming Instructions for ResponseCard RF. While the light is flashing red and green, enter the 2 digit channel code (ie. channel 73 = 73, channel 74 = 74).

josie
Download Presentation

Press and release the "GO" button.

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Channel Programming Instructions for ResponseCard RF • Press and release the "GO" button.

  2. Channel Programming Instructions for ResponseCard RF • While the light is flashing red and green, enter the 2 digit channel code (ie. channel 73 = 73, channel 74 = 74).

  3. Channel Programming Instructions for ResponseCard RF • After the second digit is entered, you will receive an amber light • IMMEDIATELY click and HOLD the “GO” button again.

  4. Channel Programming Instructions for ResponseCard RF • The light will change to a solid green for a few seconds to indicate that your clicker has been programmed successfully. • It may take more than one attempt to program your clicker.

  5. Channel Programming Instructions for ResponseCard RF • When responding, always make sure to firmly press the response buttons until a green light appears -- this indicates that your signal was received by the computer. • You can change your answer choice as many times as you want until the polling ends. The computer will take the last answer you entered before polling closed.

  6. Channel Programming Instructions for ResponseCard RF • When Amber = Polling is closed or not available. • If you continue to get an amber light even when polling is open and you have programmed your clicker correctly, you may need a new battery.

More Related