1 / 16

Lecture 4

Lecture 4. Ideal cycles III Reheat cycle Intercool cycle The WR21 engine Polytropic efficiencies Exercise Problem 2.1, Problem from 2003 exam and Problem 2.9. Reheat cycle/Reheat with heat exchanger. Split expansion into a high pressure and a low pressure step and reheat in between.

jrose
Download Presentation

Lecture 4

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Lecture 4 Ideal cycles III Reheat cycle Intercool cycle The WR21 engine Polytropic efficiencies Exercise Problem 2.1, Problem from 2003 exam andProblem 2.9

  2. Reheat cycle/Reheat with heat exchanger • Split expansion into a high pressure and a low pressure step and reheat in between

  3. Selection of pressure ratio – reheat cycle

  4. Theory 4.1 - Selection of optimal pressure ratio – reheat cycle Introduce auxiliary variable β according to:

  5. Theory 4.1 - Selection of optimal pressure ratio – reheat cycle Insert result into power formula:

  6. Efficiency for reheat cycle (at pressure division for max. power output)

  7. Cycle changes due to reheat Figure 2.5 or better from Cengel You introduce an “additional cycle” operating at lower pressure ratio. We have already derived what we want to know!!! Decreasing pressure ratio in simple cycle => efficiency decreases.

  8. Reheat/reheat with heat exchange compared to single cycle • Simple reheat • Power output increases • Decrease in efficiency (added cycle is worse than underlying cycle, since simple cycle efficiency decreases with pressure ratio) • Reheat with heat exchange • Power output increases • Increase in efficiency. Heat is added at a higher average temperature and removed at a lower temperature than in simple cycle. See figure to the right. Simple cycle Reheat with heat exchange

  9. Bulky and requires large amounts of cooling water Compactness and self-containedness of gas turbine is lost What about efficiency and power output of cycle ?.... Try to draw a T-S diagram and make some arguments. Check with CRS. Intercooling

  10. ICR cycle - Intercooled Recuperated Cycle Improved part load performance => 30% reduction in fuel burn for a typical operating profile 25 MW output Fits in footprint of current naval engines of similar power. LM2500 ηth=37. ICR ηth=43. Starts in two minutes instead of 4 hours for comparable steam engine. Greater power for given space when compared with steam/diesel. The WR 21

  11. The WR 21

  12. Polytropic efficiencies - motivation • If we study multistage designs the isentropic efficiency for high pressure compressors tend to be lower than for low pressure compressors. Why? • Assume ηs (stage efficiency) constant, the overall temperature rise ΔT is obtained by:

  13. Polytropic efficiency - motivation Thus, the total efficiency is always less than the stage efficiency. But: Preheat effect: as you go through the stages you move to the right in the T-s diagram. Isobars diverge in that direction!

  14. Polytropic efficiency – “preheat independence” • Define the polytropic efficiency (differential stage efficiency) as: We have (second revision question – lecture 1 – before integrating): (1) + (2) produces:

  15. Polytropic efficiency – “preheat independence” Similarly for a turbine: First guess for preliminary design work Polytropic efficiencies are useful for preliminary design, when many compressor concepts with different pressure ratios may be evaluated for a given application.

  16. Know how to show (by arguments or T-S diagrams) how the efficiency of the reheat cycle with and without heat exchange changes in comparison with the simple cycle (ideal case) Be able to derive the optimal pressure division in ideal reheat cycles Be familiar with the polytropic efficiency concept and state reasonable loss levels for turbine and compressors Learning goals

More Related