1 / 5

D-VXR-OE-23 Dell VxRail Operate 2023 Exam Questions

With the latest D-VXR-OE-23 Dell VxRail Operate 2023 Exam Questions from PassQuestion, you will have access to a wealth of valuable information covering all the essential exam topics, giving you the best possible chance of achieving a successful result.

karonchen
Download Presentation

D-VXR-OE-23 Dell VxRail Operate 2023 Exam Questions

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Pass DELL EMC D-VXR-OE-23 Exam with Real Questions DELL EMC D-VXR-OE-23 Exam Dell VxRail Operate 2023 https://www.passquestion.com/D-VXR-OE-23.html 35% OFF on All, Including D-VXR-OE-23 Questions and Answers Pass DELL EMC D-VXR-OE-23 Exam with PassQuestion D-VXR-OE-23 questions and answers in the first attempt. https://www.passquestion.com/ 1 / 5

  2. 1.What is the maximum number of racks supported when expanding a VxRail cluster beyond a single physical rack? A. 2 B. 4 C. 6 D. 8 Answer: C 2.What is the correct order of steps to create a VM for a new project using vSAN and VxRail? Answer: 3.How many Failures to Tolerate can be configured with vSAN RAID-1? A. 0 B. 1 only C. 1 or 2 only D. 1, 2, or 3 Answer: D 2 / 5

  3. 4.A VxRail administrator wants to rename the VxRail cluster and the VxRail vSAN datastore. What is the recommended method to make these changes? A. Refer to the VMvvare vSphere and vSAN documentation Follow the steps detailed in the VMware documentation B. Renaming the objects is not permitted Rebuild the cluster with the desired names C. Use SolVe to generate the relevant procedures Follow the steps detailed in the procedures D. Refer to the VxRail Appliance Administration Guide Follow the steps detailed in the guide Answer: B 5.A VxRail administrator observes alarms that start with VXR in the vSphere client. How can they obtain information about the alarms and the related knowledge base articles? A. Go to the Alarm Definitions page and click the KB link. B. Use the VxRail Event Code Reference. C. Use the VxRail Administration Guide. D. Consult the General VMware Knowledge Base. Answer: B 6.VxRail Manager provides a software stack for a software-defined data center. Which layers are part of the stack? A. Storage, security, and management B. Security, management, and network C. Network, storage, and security D. Management, network, and storage Answer: D 7.What is the sequence of steps to deploy a second VDS for VxRail network traffic? A. 1. Create port groups on the new VDS for the VxRail networks that must be migrated. 2. Configure ToR switches to support VxRail network traffic on switch ports that are connected to the VxRail NIC ports. 3. Cable VxRail NIC ports to ToR switches. 4. Configure the new VDS - Add hosts, assign physical adapters, and assign port groups to VMkernel adapters. 5. Create a VDS with the required number of uplinks. B. 1. Configure the new VDS - Add hosts, assign physical adapters, and assign port groups to VMkernel adapters. 2. Create a VDS with the required number of uplinks. 3. Cable VxRail NIC ports to ToR switches. 4. Configure ToR switches to support VxRail network traffic on switch ports that are connected to the VxRail NIC ports. 5. Create port groups on the new VDS for the VxRail networks that must be migrated. C. 1. Create a VDS with the required number of uplinks. 2. Configure the new VDS - Add hosts, assign physical adapters, and assign port groups to VMkernel adapters. 3. Cable VxRail NIC ports to ToR switches. 3 / 5

  4. 4. Create port groups on the new VDS for the VxRail networks that must be migrated. 5. Configure ToR switches to support VxRail network traffic on switch ports that are connected to the VxRail NIC ports. D. 1. Configure ToR switches to support VxRail network traffic on switch ports that are connected to the VxRail NIC ports. 2. Configure the new VDS - Add hosts, assign physical adapters, and assign port groups to VMkernel adapters. 3. Create port groups on the new VDS for the VxRail networks that must be migrated. 4. Cable VxRail NIC ports to ToR switches. 5. Create a VDS with the required number of uplinks. Answer: A 8.A VxRail administrator wants to determine how long the rebuild will take after experiencing a disk failure in the vSAN Cluster. Where is this information located in the vSphere Client? A. Configure > vSAN > Services > Object repair timer B. Monitor > vSAN > Resyncing Objects C. Monitor > vSAN > Data Migration Pre-Check D. Configure > vSAN > Disk Management Answer: B 9.What is the correct path for editing the Object Repair Time from the vCenter client? A. Host > Monitor > vSAN > Services > Object Repair Timer (Repeat for each host) B. Cluster > Monitor > vSAN > Services > Object Repair Timer C. Cluster > Configure > vSAN > Services > Advanced Options > Edit D. Host > Configure > vSAN > Services > Advanced Options > Edit (Repeat for each host) Answer: C 10.Where in the VxRail Plugin can log bundles be generated? A. Monitor > VxRail > Issues and alarms B. Configure > VxRail >Troubleshooting C. Monitor > VxRail > Security D. Configure > VxRail > Support Answer: B 11.A customer has a large storage capacity and low I/O performance requirements. Which VxRail solution is the best fit? A. E Series B. P Series C. S Series D. V Series Answer: C 12.What is true about Multitrack VxRail cluster expansion? 4 / 5

  5. A. All VxRail networks are routable by default B. VxRail nodes in the same cluster within a rack can be on different subnets C. VxRail cluster can be expanded up to a maximum of 4 racks D. VxRail System VMs run on the nodes in the first rack Answer: D 13.An administrator wants to perform maintenance on a VxRail system. Which configuration should be used for the VxRail Cluster Health Monitoring before starting the maintenance activity? A. Maintenance mode B. Disabled C. Enabled D. Suspended Answer: A 14.Using VxRail Manager, what information can you find under the physical health view? A. Model, Temperature, Memory, and Health State B. Cluster ID, PSNT, Model, and Temperature C. PSNT, Operational Status, Health State, and Memory D. Cluster ID, Connected, Health State, and Operational Status Answer: B 15.When configuring Data at Rest Encryption (DARE) on a vSAN cluster, what is required? A. vSAN Standard B. vSAN Advanced C. External Key Management Server D. Internal Key Management Server Answer: C 16.What VxRail Manager activities can be performed by a user with the VMware Administrator role? A. Build, Manage, Expand, and Shutdown Cluster only B. Build, Manage, and Expand Cluster Manage HA, DRS, and vSAN settings C. Build, Manage, and Expand Cluster only D. Build, Manage, and Shutdown Cluster Manage vSAN settings Answer: D 17.The vSphere Client is showing several failures on node 3. Support recommends opening an SSH session to troubleshoot. The connection fails to establish. Which path should be used to enable SSH on the host from vSphere Client? A. Host > Configure > VxRail > Enable SSH B. Cluster > Configure > VxRail > Hosts > Enable SSH C. Cluster > Monitor > System > Services D. Host > Configure > System > Services Answer: D 5 / 5

More Related