Wicker Chair Repair Solutions – Saving Your Seat

1. Wicker Chair Repair Solutions – Saving Your Seat When wicker furniture is damaged, many owners panic. Whether the piece is made from natural plant fibers or synthetic resin material, it requires repair. Fortunately, most common repairs to woven wicker pieces are simple enough to tackle at home with a few basic tools and repair supplies. These solutions will help your furniture look as good as new and add value to your investment. 1. Reed Repair Reed repair is a common solution for wicker furniture that is broken, damaged or has lost its woven fibers. This type of repair is typically a do-it-yourself project and requires basic tools. The most important tool you will need is a pair of scissors. These can be used to cut thin strand cane or thicker reed fibers. If you can, buy replacement reed fibers that are the same width and length as the existing ones. This will ensure a smooth, consistent repair.

2. You will also need a wire tool to weave the new reeds into place. You will need at least 2 inches of extra length on each side of the reeds to keep them from slipping out of place. Start weaving a replacement reed into the damaged area, starting at a point that is less visible. Follow the pattern of the woven wicker for the best results. 2. Caning Repair Chair caning is a time-honored technique that lends furniture a natural quality of distinction. It also helps to keep Wicker Chair Repair from looking drab and lifeless. When you notice a caned seat is frayed or brittle, it’s important to repair the damage promptly. Otherwise, the cane will become even more brittle and may snap or tear. This can make it difficult or impossible to recane the seat. Fortunately, there are several options to save your seat and make it more affordable. One option is to have a spline glued to the edge of the cane. This method is stronger than hand-caning but can be a little more expensive because it requires new grooves to be cut into the back and side of the cane. 3. Weaving Repair Whether it’s an antique wicker chair repair or a synthetic plastic one, a woven piece of furniture can take a beating over time. Luckily, simple repairs can be done at home and don’t require any professional help. If you have a damaged reed on your wicker furniture, you can rewrap it with a few lengths of braided seagrass reed. This reed is a great repair for wicker tables, chairs and baskets as it’s durable and flexible.

3. A dab of wood glue keeps the wrapping tight and holds broken fibers together. You can use a flat toothpick or cotton swab to apply and spread the glue. You can also check for loose wrappings on the legs and arms of your wicker furniture. These are areas that hold the reed in place, so if they’re coming off, you can fix them with a little bit of glue and tacks. This will keep the reed in place and prevent any of the weaving from falling apart. 4. Seat Cushion Repair Seat cushions on Wicker Chair Repair often fall apart due to wear. They may also be damaged by excess moisture, like if you hose them down. Luckily, seat cushion repair is simple to do and can save your seat. You only need basic tools and a piece of upholstery fabric. Some Wicker Chair Repair have pan-seats that are made from foam and fabric on top of a plywood cushion. These are easy to replace with foam sheets and spray adhesive. Once you have your new foam, place the chair seat face down on a piece of upholstery fabric that is about 3 inches bigger than the plywood cushion or pan-seat. You may need to hammer something heavy on the back of the cushion to compress the foam before removing it. Staple the fabric to the cushion using an upholstery staple gun. Make sure to use staples with a 1/4-inch leg and a 3; these will secure the fabric to the seat and prevent it from coming loose later. 5. Repairing a Loose Piece of Woven Wicker

4. To repair a loose strand of woven wicker on a chair leg, you need to cut a length of rattan caning and soak it in water for 30 minutes to make it flexible. After the caning has regained its flexibility, insert the end of the new strand into the loose woven wicker and wrap it around the leg of the chair. Once the wicker is completely wrapped, use a small tack to secure it in place. 6. Reweaving Reeds To replace broken reeds in a Wicker Chair Repair , start by threading replacement reeds into the chair, starting from a point that is less visible on the back. Once the reeds are all in place, weave them into the wicker pattern to match the original reeds. Repeat this process for all damaged reeds until the whole section is replaced. When done, tuck the ends underneath any intersecting pieces of reeds, preferably facing opposite from the surface to make the repair blend in. To finish the repair, apply a coat of clear varnish or polyurethane to protect your repaired wicker. The type of varnish or seal you choose will depend on the finish of your chair and whether it’s painted. Thanks for visiting moonhadi.com