1 / 5

Model 296AP

Model 296AP. DISASSEMBLY AND ASSEMBLY. 1. Disassembly To replace the spring, or clean any of the internal components of the valve, proceed in the following manner:. Withdraw the clip, using a punching tool, and lift the lever Unscrew the cap and remove

kera
Download Presentation

Model 296AP

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Model 296AP DISASSEMBLY AND ASSEMBLY 1. Disassembly To replace the spring, or clean any of the internal components of the valve, proceed in the following manner: • Withdraw the clip, using a punching tool, and lift the lever • Unscrew the cap and remove • Holding the rod steady, loosen the hollow screw nut, until the constructive limit, and the follow screw until you note a releasing of the spring • Unscrew the bell holding the rod and the body steady • Lift the bell and you will have access to all the components

  2. Model 296AP DISASSEMBLY AND ASSEMBLY • 2. Assembly • Enter the bell and the joint through the upper part the rod • Turn the bell holding the rod and the body steady • Replace the hollow screw with the hollow screw nut • Adjust the set pressure with the hollow screw and fix the adjustment position with the hollow screw • Tighten the cap • Place the lever and fix it with the clip

  3. Model 296AP ADJUSTEMENT OF THE BLOWDOWN • Slack the stud • Twist or untwist the deflector according the difference in the wished locking pressure (Blowdown) • Fix the deflector position screwing the stud

More Related