1 / 13

How to Start Up CCStudio 3

How to Start Up CCStudio 3. DSP LAB T.A.:. Device Setup. Double-click “ Setup CCStudio3 ” on desktop, and you will see the above dialog. Choose Your Device. If you want to use the simulator. Select “ C6416 Device Cycle Accurate Simulator,Little Endian ”

ketan
Download Presentation

How to Start Up CCStudio 3

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. How to Start Up CCStudio 3 DSP LAB T.A.:

  2. Device Setup • Double-click “Setup CCStudio3” on desktop, and you will see the above dialog.

  3. Choose Your Device • If you want to use the simulator.Select “C6416 Device Cycle Accurate Simulator,Little Endian” • If you want to use the DSK board.Select “C6416 V1.1 DSK”.

  4. Click “import”

  5. Click “Save and Quit”

  6. Click “Yes” • CCS3 will then be started up.

  7. New Project

  8. Add files to project

  9. 3 files needed to be added • Source file (.c or .asm) ;.cmd ; .lib

  10. Where are them? • You need to write your own source code. • Find library in the following path:C:\CCStudio\c6000\cgtools\lib\rts6400.lib • Find cmd file in any appropriate example: C:\CCStudio\c6000\cgtools\lib\lnk.cmd

  11. Rebuild Projects • To compile and link all the files

  12. Load Program

  13. Debug / Run (F5)

More Related