1 / 41

ORD-7

ORD-7. Ordinary Boat Handling. Instructors: George Crowl. Course Outline. a. Name the principal parts of the mast, boom, spars, standing and running rigging and sails of a gaff- or Marconi-rigged sloop, schooner, and ketch or yawl.

kevincole
Download Presentation

ORD-7

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. ORD-7 Ordinary Boat Handling Instructors: George Crowl

  2. Course Outline • a. Name the principal parts of the mast, boom, spars, standing and running rigging and sails of a gaff- or Marconi-rigged sloop, schooner, and ketch or yawl. • b. Demonstrate your ability to handle a vessel with paddles or oars by doing one of the following: Safely board a rowboat and row in a straight line for 200 yards/meters, stop, make a pivot turn, return to the starting point and backwater in a straight line for 50 yards/meters. Make a turn and return to the starting point. OR Safely board a canoe, kayak, or paddleboard and paddle a straight line for 200 yards, stop, pivot, return to the starting point, and backwater in a straight line for 50 yards/meters. Make a turn and return to the starting point. Demonstrate a draw stroke to move the boat sideways both right and left, and forward and reverse sweeps to spin the boat both clockwise and counter.

  3. ORD-7a Name the principal parts of the mast, boom, spars, standing and running rigging and sails of a gaff- or Marconi-rigged sloop, schooner, and ketch or yawl.

  4. Gaff-rigged Sloop • “Gaff” is the boom along the top of the mainsail • Provides more sail area for less mast height

  5. Marconi-rigged • Sails have no spars on top. Triangular shape.

  6. Mast, Boom, Spar • Mast – Tall, vertical pole – carries sails aloft • Boom – Horizontal pole – holds sail out • Spar – Generic term for above, plus nearly any other pole on the boat

  7. Standing Rigging • Holds mast(s) in place • Forestay, backstay • Shrouds (upper, lower, front,back, etc.) • Split backstay • For bowsprit • Any other line (often wire) that does not move

  8. Running Rigging • Anything that moves a sail or spar • Halyards • Sheets • Topping lift • Boom vang • Reefing • Etc., etc.

  9. Mainsail Parts

  10. Gaff-rigged Sail • Top edge of sail has new names

  11. Two Main Sets of Terms • Mainsails, mizzen, foresail (not jib) all look somewhat similar and have the same named parts. • Various jibs, staysails and genoas use jib terms.

  12. Sloop Sails • Fore – jib or genoa • Aft – mainsail • Mainsail • Jib

  13. Ketch or Yawl Mainsail Mizzen Jib Staysail

  14. Schooner Foresail Jib Mainsail Staysail

  15. ORD-7b (1) [Rowing] Demonstrate your ability to handle a vessel with paddles or oars by doing one of the following: Safely board a rowboat and row in a straight line for 200 yards, stop, make a pivot turn, return to the starting point and backwater in a straight line for 50 yards/meters. Make a turn and return to the starting point.

  16. Oars • Several varieties • Blade • Shaft / loom • Collar / leather / sheath (button if provided) • Handle / grip

  17. Oarlocks, Etc. • Three main oarlocks are shown • They mount in the hardware below • Oars are protected with the leather and button

  18. Rowing Setup • Oars right length – 2x thwart length + freeboard • Oar handles – touch or overlap when set up • Oars – sleeve in oarlocks, button inboard • Oars should naturally have blade in water Boarding • Get body weight low (crouch) • Place one foot on centerline of boat • Grasp gunwales • Bring other foot on board, sit down

  19. Catch • Putting the blades in the water, ready to pull • Blades vertical, in water behind you • Leaning “forward”, hands fully “forward”

  20. Pull • Lean body “back,” pull with arms • Oar blades in water, traverse about 90° • Power comes here, uses whole body

  21. Feather • Raise the blades out of the water • Rotate the wrists backwards to “feather” the blades parallel to the water • Start recovery at the same time

  22. Recovery • Bring the blades toward the bow (push handles away) • Keep blades feathered

  23. Techniques • Pull the oars evenly • Watch your wake to stay in a straight line • Look over your shoulder occassionally, not very often • To pivot turn, push one oar forward in the water while pulling the other oar backward • To go backward, reverse the Catch, Pull, Feather, Recovery process, dipping your oars and pushing away while in the water

  24. Basic Rowing Commands • Out oars – Put the oars in position to row • Give way – Pull the oars in a complete cycle • Hold water – Put the oars in the water abeam, hold them there • Back water – row backwards • Boat oars – rotate the handle aft, put the blade inside the boat forward of where you are sitting

  25. ORD-7b (2) [Paddling] OR Safely board a canoe, kayak or paddleboard and paddle in a straight line for 200 yards, stop, make a pivot turn, return to the starting point and backwater in a straight line for 50 yards/meters. Make a turn and return to the starting point. Demonstrate a draw stroke to move the boat sideways both right and left, and forward and reverse sweeps to spin the boat both clockwise and counter.

  26. Paddling • Paddling may be done in canoes, kayaks, or paddleboards. • This PPT will be based on canoes for the basics • There are differences between the vessels, the paddles, and the techniques employed in each of these vessels. • This PPT may be modified based on the vessels used for the requirement. If you modify it based on your knowledge of a type vessel, please send it to the author.

  27. Advantages / Disadvantages • Face forward to paddle, see where you are going • Easy to dock or come alongside • There are many different strokes to learn • Staying on course is more difficult because of one paddle on the side of the boat • Less power, the body is not as efficiently used

  28. Parts of the Paddle

  29. Boarding a Canoe • Get body weight low (crouch) • Place one foot on centerline of boat • Grasp gunwales • Bring other foot on board, sit down • Spread knees and kneel on the bottom of the canoe • Provides greater stability • Provides better power for paddling

  30. Canoe Kneeling • In spite of many photos showing people sitting in canoes... • The proper way to operate a canoe is kneeling!!! • If you do a lot of canoeing, a pair of roofer's kneepads will be good friends

  31. Basic Paddling Stroke • Catch – grip (top) hand and shaft hand put the paddle in vertically or a little slanted backward • Push – shaft hand stabilized the paddle, grip hand pushes the grip forward (bringing the blade backward) • Feather – as the blade leaves the water, turn the blade parallel to the water's surface • Recovery – rotate the blade forward, bring the grip hand close to the chest so you can reach forward with the blade • Is the basic cruising or “forward” stroke

  32. Power Stroke • The basic paddling stroke: (it’s all in the arms, shoulders & wrist) • 1 Catch – grip and shaft straight up or blade a little forward (blade in the water) • 2,3,4 Pull – lower hand pull aft on the throat, upper hand push forward or holding grip • Feather – When blade leaves water, turn blade parallel to water • Recovery – Rotate forward, grip is brought closer to chest so you can reach forward with blade. [Not well illustrated here!]

  33. Reverse Stroke • Same as above, but backwards • 1 Catch – reach behind, put paddle in near vertical • 2,3,4 Pull – push with the bottom hand, control with the top hand near shoulder • Feather – as the paddle comes out of water, turn the blade parallel to water • Recover – move blade to the rear

  34. J-Stroke • Used by singles, or rear of tandem • Keeps canoe going in a straight line • Twist the power face outboard toward the end of the stroke • Used by stern paddler of tandem, less “J” needed than with single

  35. Pitch Stroke • Newer than the J-stroke • Preferred, corrects yaw as the stroke starts • J-stroke corrects yaw as the stroke ends

  36. Sweep Stroke • Used to turn the canoe slowly away from the paddle side • Reach as far forward as practical • Sweep the paddle out to the side as far as practical, in a half-circle, ending next to the canoe in the rear

  37. Draw Stroke • Used to move the canoe sideways toward something • Put the paddle in the water vertically, as far away as you can comfortably reach • “Draw” toward the gunwale • Lift out and repeat • OR twist the paddle in the water to move it out, and repeat

  38. Pry or Push-Away Stroke • Used to move the canoe sideways away from something • Both start with the paddle next to the boat • Both push away from the boat • Pry stroke uses the side and gunwale as a fulcrum • Push-away is the reverse of the draw stroke

  39. Bow Rudder • In addition, the bow in a tandem canoe has two additional commands (usually give by the stern) • To turn toward the side the bow is paddling on – Bow Rudder – place the throat of the paddle near the gunwale on the paddling side at a 45° angle • To turn to the other side – Cross Bow Rudder – without changing hands, place the throat of the paddle near the gunwale on the non-paddling side at a 45° angle

  40. Remember • These are primarily canoe strokes • Kayak and paddleboard strokes will be similar, but different in detail • If someone wants to write a similar set of slides for kayak or paddleboard, please do so and send a copy to me.

  41. Questions?

More Related