1 / 26

Itec training

Itec training. This training session will explain how to use ITEC equipment and support learning in the classroom setting . Presented by: R. Schmid . Table of contents . The intended use of this tutorial is to help you learn how to use all of the ITEC Equipment on SJFC campus. .

lacy
Download Presentation

Itec training

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Itec training This training session will explain how to use ITEC equipment and support learning in the classroom setting. Presented by: R. Schmid

  2. Table of contents The intended use of this tutorial is to help you learn how to use all of the ITEC Equipment on SJFC campus. • LCD Projector • Select audio/video source • Power Screen • Volume Control • Picture Mute • DVD/VCR Control Panel • Document Camera • Laptop setup • Touch Screen Panel • OIT Help Desk

  3. Step 1: Turn on LCD Projector • From the control panel, within the Display Section, press the ON or OFF button. • Button will flash while it is warming up or cooling down. • Flashing stops, LCD projector is ready for use—select a source to display. ** Remember to turn off the projector when finished using**

  4. Step 3: powered projection screen • In classrooms with a powered projection screen, the screen control switch can be located on the wall behind the presenter’s station.

  5. Step 4: Volume control • Use the volume knob on the control panel to adjust the volume of the selected device. • Troubleshooting steps….

  6. No sound ??? • If using a PC or Laptop: • From the task bar, click on the sound icon • Ensure that Mute isn’t checked • Raise or lower the volume control bar to adjust the sound

  7. What is Picture Mute? • To mute or “hide” what is being displayed through the projector. • Press the PIC MUTE button, located in the middle of the control panel.

  8. DVD/ VCR Control Panel • After selecting DVD or VCR as your source, use this control panel just like you would a remote control.

  9. Step 2: Display device through lcd projector • From the input button section, select device to be displayed. Showing a DVD to your class, press the DVD button

  10. Choose a model • Three different models on campus, click on the picture for instructions.

  11. Step 1 of 4: Power ON • Power on, hold down button until the red light flashes. • Ready to use when the light turns green. Back Step 2

  12. Step 2 of 4: Select DOC CAM as source • From the control panel, press the DOC CAM button. Back Step 3

  13. Step 3 of 4: Focus and Zoom • Press the AF button to Auto Focus • Digital Zoom  press the Zoom+ or – button • Manual Zoom raise the camera neck to position the camera Back Step 4

  14. Step 4 of 4: Power Off • Hold down the Power button until the green light flashes, light turns red when the document camera is off. Back Choose a model

  15. Step 1 of 4: Power ON • Slide the POWER button up or down. • Ready to use when the light is on. Back Step 2

  16. Step 2 of 4: Select DOC CAM as source • From the control panel, press the DOC CAM button. Back Step 3

  17. Step 3 of 4: Zoom • Digital Zoom  sliding your finger across the zoom wheel, you can zoom in or out. Step 4 Back

  18. Step 4 of 4: Power Off • Slide the Power button down to turn off. Back Choose a model

  19. Step 1 of 4: Power ON • Power on, hold down button until the red light flashes. • Ready to use when the light turns green. Step 2 Back

  20. Step 2 of 4: Select DOC CAM as source • From the control panel, press the DOC CAM button. Back Step 3

  21. Step 3 of 4: Zoom and Brightness • Press the Zoom+ or – button to zoom in or out. • With the arm lights on, press the Brightness+ or – button. Back Step 4

  22. Step 4 of 4: Power Off • Hold down the Power button until the green light flashes. • The document camera is off when the light turns red. Back Choose a model

  23. How do I connect a Laptop? • Attach the VGA and audio cables if necessary to your laptop. • Enable the Monitor Out Function on your laptop Audio VGA

  24. Monitor out function • On your laptop use the “Monitor Out” key in conjunction with the Function Button (Fn). • The Monitor Out key is usually labeled with a “||”symbol or says CRT/LCD” and is usually the F4, F5, or F8 key

  25. Touch Screen Panel • The projector will power on once a source is selected. All sources are located on the left of the touch screen. • Note: The projector will take about 30 seconds for the lamp to warm up. Volume Sources Help

  26. Need Assistance – Contact help desk • Contact the OIT Help Desk • By phone: 385-8016 –please feel free to leave a message • By e-mail: helpdesk@sjfc.edu • In person: Kearney 053 (adjacent to the computer lab) • ITEC classrooms on SJFC campus- View pictures and instructions online at http://oit.sjfc.edu/Labs/lab_intro.asp

More Related