1 / 8

Make these 3 little cuts and bends on the body of your car.

After the glue has cooled (20 minutes would be good) roll the axle on the ground and work with it to get it straight. Squeeze the wheel at the axle when adjusting the wheel. The wheel can rip off the axle if you don’t handle it carefully. .

lazaro
Download Presentation

Make these 3 little cuts and bends on the body of your car.

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. After the glue has cooled (20 minutes would be good) roll the axle on the ground and work with it to get it straight. Squeeze the wheel at the axle when adjusting the wheel. The wheel can rip off the axle if you don’t handle it carefully.

  2. Make these 3 little cuts and bends on the body of your car.

  3. Glue the straws to the body… keep the axle out of the glue.

  4. Cut two supports for the axle straws.

  5. Put plenty of glue under it. Keep the glue off the metal part of the axle.

  6. Add glue on the outside too. This part of the car will be under considerable stress.

More Related