1 / 0

An Introduction to Forces

An Introduction to Forces. Definition: A force is a push or a pull in a particular direction. How does it balance? Textbook p. 53.

lethia
Download Presentation

An Introduction to Forces

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. An Introduction to Forces

    Definition: A force is a push or a pull in a particular direction.
  2. How does it balance?Textbook p. 53 You probably would be uneasy standing under Balanced Rock near Buhl, Idaho. Yet this unusual rock stays in place year after year. The rock has forces acting on it. So, why doesn’t it fall over? Answer: The forces acting on the rock combine, and the rock does not move. Now, let’s read page 54.
  3. Remember… A force is a push or pull in a particular direction.Forces Packet p. 1 EXAMPLE of a PUSH: When you ride a bike, your foot pushes against the pedal. The push makes the wheels of the bike move. EXAMPLE of a PULL: When you drop something, it is pulled to the ground by gravity.
  4. Remember…Textbook p. 54, Review from Ch. 2- Lesson 1 There are contact forces. Example: Air Resistance, pushing a shopping cart, pulling on a rope in Tug’o’War There are non-contact forces. Example: Gravity, magnetism, static electricity
  5. The Big Ideas…Forces Packet p. 1 Forces can make objects: start moving. move faster. move slower. stop moving. change direction. change shape.
  6. REMEMBER…Forces Packet p. 1 Velocity is the speed and direction of a moving object. Acceleration is the measure of the change in velocity during a period of time. Since forces cause a change in the speed or direction of an object, we can say that forces cause changes in velocity. SO… FORCES CAUSE ACCELERATION!
  7. Force Facts…Forces Packet p. 1 Forces are measured in Newtons (N). Forces come in pairs. Forces act in a particular direction. Forces usually cannot be seen, but their effects can be seen. FYI- A Newton is equal to the amount of force required to accelerate a mass of one kilogram at a rate of one meter per
  8. For the next few slides:Label each picture as a push or pull. Then describe whether the force is causing a change in speed or direction or both.Forces Packet p. 2
  9. Lift Off! Push Change in speed
  10. Parachute Pull (gravity) Change in speed and direction
  11. Rolling a Rock Uphill Push Change in speed
  12. Teeter Totter Push AND Pull Change in speed and direction
  13. Hitting a Golf Ball Push Change in speed
  14. Combining ForcesTextbook p. 55-56, Forces Packet p. 3 Net Force: The combination of all the forces acting on a object. Forces may work together. This means the forces act in the same direction. Forces may be opposite forces. This means the forces act in opposite directions.
  15. Balanced and Unbalanced ForcesTextbook p. 56, Forces Packet p. 3 Balanced Forces: Forces that combine and form a net force of zero. Balanced forces do not cause a change in motion. Unbalanced Forces: Forces acting on an object that combine and form a net force that is not zero. Unbalanced forces cause a change in motion.
  16. Balanced Forces
  17. Unbalanced Forces
  18. Video Clip- Balanced and Unbalanced Forces2:53
  19. Circle the best answer. The forces above are showing PUSHING/PULLING forces. The forces above are WORKING TOGETHER/OPPOSITE forces. The forces are EQUAL/NOT EQUAL. The forces DO/DO NOT balance each other. The resultant force is 1000N TO THE LEFT, 1000 N TO THE RIGHT, or ZERO. There IS/IS NO motion. Forces Packet p. 4
  20. Answers: The forces above are showing PUSHING/PULLINGforces. The forces above are WORKING TOGETHER/OPPOSITEforces. The forces are EQUAL/NOT EQUAL. The forces DO/DO NOT balance each other. The resultant force is 1000N TO THE LEFT, 1000 N TO THE RIGHT, or ZERO. There IS/IS NO motion. Forces Packet p. 4
  21. Circle the best answer. 7. The forces shown above are PUSHING/PULLING forces. 8. The forces shown above are WORKING TOGETHER/OPPOSITE forces. 9. The forces are EQUAL/NOT EQUAL. 10. The forces DO/DO NOT balance each other. 11. The stronger force is pulling to the RIGHT/LEFT. 12. The weaker force is pulling to the RIGHT/LEFT. 13. The motion is to the RIGHT/LEFT. Forces Packet p. 5
  22. Answers: 7. The forces shown above are PUSHING/PULLING forces. 8. The forces shown above are WORKING TOGETHER/OPPOSITE forces. 9. The forces are EQUAL/ NOT EQUAL. 10. The forces DO/ DO NOT balance each other. 11. The stronger force is pulling to the LEFT/RIGHT. 12. The weaker force is pulling to the LEFT/RIGHT. 13. The motion is to the LEFT/RIGHT. Forces Packet p. 5
  23. Newton’s 1st Law(also known as The Law of Inertia)Textbook p. 57 A moving object moves in a straight line with constant speed unless a force acts on it. The tendency of an object at rest to remain at rest and an object in motion to remain in motion unless acted upon by an unbalanced force. Objects do not change their motion unless a force acts on them
  24. Newton’s First Law of MotionTextbook p. 57
  25. Objects at Rest Objects at rest tend to stay at rest unless acted upon by a force. [push or pull] Newton described this tendency as inertia. Inertia can be described as the tendency of an object to keep doing whatever’s it’s doing.
  26. What about objects that are already in motion? Newton stated that objects in motion tend to stay in motion until acted upon by a force (or it hits an outside force.)
  27. The truck is in motion. What is the force that causes it to stop? The push of the stopped car. The car is at rest. What is the force that causes it to move? The push of the truck.
  28. Mass & Inertia Mass is the amount of matter in an object. The more MASS an object has, the more INERTIA the object has. Bigger objects are harder to start & stop Which vehicle has more inertia?
  29. Video Clip: The Science of Football- Newton’s First Law of Motion3:51 LINK
More Related