1 / 26

Old IDESA and New IDESA-2

Old IDESA and New IDESA-2. European Training Programs for Implementation of DSM CMOS ASICs. Wieslaw Kuzmicz,Warsaw University of Technology, Warsaw, Poland, wbk@imio.pw.edu.pl Bart DeMey, Microelectronics Training Center, imec, Leuven, Belgium, Bart.DeMey@imec.be with all project partners.

Download Presentation

Old IDESA and New IDESA-2

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Old IDESA and New IDESA-2 • European Training Programs for Implementation of DSM CMOS ASICs Wieslaw Kuzmicz,Warsaw University of Technology, Warsaw, Poland, wbk@imio.pw.edu.pl Bart DeMey, Microelectronics Training Center, imec, Leuven, Belgium, Bart.DeMey@imec.be with all project partners

  2. IDESA and IDESA-2 are FP7 projects funded by the European Union.

  3. Outline • Motivation and goals • More Moore, less designs • More Moore, more money • More Moore, more problems • Small but not beautiful • IDESA: 2008 - 2010 • About the project • Four hands-on courses • Advanced seminars • Outcomes, problems and lessons learned • IDESA-2: 2010 - 2012 • What’s old, what’s new • Practical aspects • Information • Conclusions

  4. Consequence: Europe has almost lost ASIC production to Far East… Is Europe going to lose design as well? 2008: more Moore, less designs Facts: • Number of university designs submitted to EUROPRACTICE MPW service started to decrease in 1997 • 1997: ~ 400 • 2003: ~ 200 • Many universities abandoned silicon implementation oriented courses • Digital system design: software and FPGA only • Analog design: slowly disappearing, together with device physics and design

  5. 2008: more Moore, more money? • Cost of processed silicon goes up… • …but the number of devices per unit area goes up faster. • -> the cost of a single transistor goes down, • -> larger, more complex and less expensive SoCs. This is the driving force for the industry. But what helps big IDMs focusing on large volume manufacturing, kills silicon implementation activities at universities! • University designs do not have millions of transistors… • …but the minimum silicon area must be paid for. • -> the cost of a single transistor goes up, • -> silicon prototyping becomes prohibitively expensive.

  6. Introduction of mini@sic - reduced cost MPW option Extra EU financial support for university DSM designs 2008: more Moore, less designs Is the silicon cost the only reason? Source: EUROPRACTICE 6

  7. Density rules and dummy fills Resolution enhancement techniques 2008: more Moore, more problems No. of design rules 700 600 500 400 300 200 100 350 250 180 150 120 90 nm Technology node Sources: Medea+; TSMC; IDESA course OPC picture courtesy of J-M. Brunet, IEEE Web Seminar, November 9, 2006, reproduced with permission

  8. 2008: small but not beautiful • DSM devices: • Complex structures: STI, triple well, retrograde doping, LDD and pocket implants, multilayer gate stack • Complex physics: SCE and RSCE, DIBL, poly depletion, gate tunneling current, band to band junction leakage, stress effects, ballistic transport, quantum effects • Complex models • Large variability • Low VDD and VGS voltages • Low threshold voltage, high subthreshold “off” current • DSM circuit and system design more complicated • Digital design: “low leakage” architectures, high power density, complex timing verification, … • Analog design: low supply voltage, large mismatch, high device output conductance, …

  9. IDESA: about the project Mission: To bridge the gap between the industrial DSM design flows, methodologies and tools, and the design knowledge, competences and skills at European universities. • Four advanced hands-on courses focusing on 90 nm technology: • Advanced analog implementation flow • Advanced RF implementation flow • Advanced digital physical implementation flow • Design for manufacturing • Advanced seminars (1 to 3 hours each) introducing problems beyond 90 nm • IDESA Workshop Main actions:

  10. IDESA: four advanced hands-on courses Course brochures available on IDESA Web site

  11. IDESA: advanced courses - locations • Hosts: universities and public research institutes • Good geographical coverage • One course cancelled due to insufficient number of registered participants

  12. IDESA: advanced courses - attendees • Total number: 429 from 132 institutions and 26 countries • 20 EU member states • Highest numbers (30+) from Belgium, Spain, UK, Italy, Germany and Poland • Seven EU countries, among them Baltic states, not represented • Non-EU: Belarus, Norway, Russia, Serbia, Switzerland, Turkey

  13. IDESA: advanced seminars • Recorded and distributed in electronic form (streaming and files for download), 22 available (more expected) • Prepared mainly by external invited experts from universities, research institutes, EDA companies, IDMs • Free reuse allowed for teaching

  14. Start of IDESA Introduction of mini@sic Introduction of mini@sic Source: EUROPRACTICE Extra EU financial support Extra EU financial support IDESA: outcomes • Very high overall satisfaction level • Most course attendees declared that the courses were very relevant to their research and/or teaching , esp. lab hands-on sessions • Most course attendees declared that they were going to design DSM chips in the next year or two

  15. IDESA: problems and lessons learned • Joint course development: easier than expected • Logistics: • Web based registration (handled by RAL) • Temporary software licenses (handled by RAL and software vendors) • Remote access to computer networks at course host institutions for trainers (handled by all course hosts) • Real design kits (90 nm from TSMC), individual NDA required for all course attendees (handled by IMEC) • Marketing: Web site, e-mail campaigns, conference presentations - still not 100% successful • All analog, digital and RF-oriented courses almost fully booked (average: 16 to 18 attendees per course); DfM course less popular • Many non-EU participants had to cancel their course bookings due to financial crisis, despite travel grants offered • IDESA: a success, but about 20% of EU academic staff and PhD students reached only!

  16. IDESA-2: main actions • Four advanced hands-on courses - updated: • Advanced analog implementation flow • Advanced RF implementation flow • Advanced digital physical implementation flow (2 versions: CADENCE - based and SYNOPSYS - based) • Design for manufacturing • Courses will be repeated again at various locations 7 times each • Universities and institutes: proposals for course hosting are welcome! • NEW: courses will be open to SMEs • Advanced seminars (1 to 3 hours each) introducing problems beyond 90 nm, 65 nm, 45 nm - more will be added • Proposals for new seminars are welcome!

  17. Advanced analog implementation flow • Technology aspects in 90 nm analog - lecture • Modeling issues - lecture • Hands-on evaluation versus simulation accuracy - lecture and lab • Transistor level and behavioural level design - lecture and lab • Analog cell trimming using digital functions - lecture • Mixed mode design and its simulation methodology - lab • Mismatch and yield modeling and analysis - lecture • Analog modeling and circuit optimization - lecture • Analog circuit optimization and layout - lab 5 days Instructors from IMEC, EPFL, KUL

  18. Advanced RF implementation flow • Technology aspects in 90 nm mixed signal and RF - lecture • Mosfet modeling - lecture • Microwave passive component design and simulation - lecture and lab • Testing and microwave measurements - lecture and lab • Mismatch modeling and simulation - lecture and lab • Mixed mode SoC design and its simulation methodology - lecture • Analog and RF cell trimming using digital functions - lecture and lab • 90 nm design verification - lecture and lab • Circuit packaging - lecture and lab • Electrostatic discharge protection - lecture and lab 5 days Instructors: from IMEC, EPFL, TU Delft, WUT

  19. Advanced digital physical implementation flow • Intro: what are the new challenges to design 90 nm SoCs - lecture • Design environment and tool chain - lecture • Design synthesis (open SPARC) - lecture and lab • Leakage aware design/prevention - lecture • Design planning and floorplanning - lecture and lab • Library analysis and management - lecture • IP integration and management - lecture • Low power flow, positioning the different techniques to minimize dynamic and leakage power - lecture and lab • Physical synthesis - placement and optimization - lecture and lab • Multiple clock tree synthesis - lecture • Physical synthesis - design for test - lecture • Physical synthesis - multimode and multicorner - lecture (Continued on the next slide)

  20. Advanced digital physical implementation flow • Physical synthesis - routing to GDS2 - lecture and lab • IR drop analysis, requirement to do dynamic power analysis in 90 nm - lecture • Multimode, multicorner analysis, on chip variations and statistical static timing analysis, signoff analysis icnluding signal integrity - lecture and lab • Sign-off - lecture • Design finishing and layout verification - lecture and lab • Tape-out - lecture (continued) 5 days Instructors: from RAL STFC, IMEC, WUT

  21. Design for Manufacturing flow • Introduction to manufacturing and yield. Process flow - lecture • Defectivity - lecture • Post-layout and manufacturability - lecture • Litho simulation and process window - lab • Design and layout for litho manufacturability - lecture • Examples for other initiatives for post-layout manufacturability - lecture • Backend metallization: dual Damascene process, copper fill - lecture • DFM solutions - demo lab • Yield analysis - demo lab • Design for test and yield management - lecture 4 days Instructors: from IMEC

  22. Conditions of participation • Courses intended for academic staff (PhD students and up), all European universities and public research institutes eligible (priority for EU institutions) • Inexpensive (50 € per day); travel and local expenses paid by participants • Will be repeated in many places in Europe to reduce travel costs • Prerequisites: basic knowledge of VLSI design; some knowledge of Unix will be beneficial • 18 - 24 persons per course (limited by number of computer seats in host institution) • Materials can be freely reused in training • IC designers from SMEs may participate at cost closer to market prices

  23. Calendar • 2010: First courses already scheduled • DfM: IMEC (Belgium), 26 - 29 October 2010 • Analog: RAL (UK), 6 - 10 September 2010 • Project Web site will announce next courses • Further dates and host sites to be determined • Any European university and public research institutie can host a course • Main requirements: availability of technical infrastructure and sufficiently high expected number of participants • Course fees go to the host institution, to cover local costs

  24. Information IDESA Web site: http://www.idesa-training.org Project coordinator: Dr Bart DeMey, IMEC, Bart.DeMey@imec.be IDESA and IDESA-2 project consortium: IMEC, Leuven, Belgium - the coordinator Ecole Polytechnique Fédérale de Lausanne, Switzerland Technische Universiteit Delft, the Netherlands Rutherford Appleton Lab., STFC, Chilton, UK Slovak University of Technology, Bratislava, Slovakia Warsaw University of Technology, Warsaw, Poland Katholieke Universiteit Leuven, Belgium CEA LETI, Grenoble, France Courses will also be advertised by EUROTRAINING

  25. Acknowledgments Collaboration of all the project partners is gratefully acknowledged

  26. IDESA 2: Everybody is invited! IC Design Skills for Advanced DSM Technologies

More Related