1 / 8

Wen-Ching Su * Yiren Wang and Huoh-Jong Shiau

Environmentally Friendly Fine Machining Process of Wood. Wen-Ching Su * Yiren Wang and Huoh-Jong Shiau. China. Taiwan. Good morning! Welcome to Taiwan!. Aim of work and methods.

lovie
Download Presentation

Wen-Ching Su * Yiren Wang and Huoh-Jong Shiau

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Environmentally Friendly Fine Machining Process of Wood Wen-Ching Su* Yiren Wang and Huoh-Jong Shiau China Taiwan Good morning! Welcome to Taiwan!

  2. Aim of work and methods • A self-designed two-step surface planer with oblique angles of 15° and 20° used to machine China-fir, hard maple and red oak. Apparatus of two-step surface planer

  3. Aim of work and methods The surface quality between one-set and two-set oblique cutting will be explored. Object The machined surfaces were compared to sanding and planning.

  4. Results It could produce different chips for the same oblique angle in cutting softwood and hardwood. China fir Hard maple Fig.1 Chip formation

  5. Results planning surface The peak of roughness profile was near the center line, that is, the latewood did not protrude the earlywood on the machining surface of surface planer. sanding surface oblique cutting surface Fig.2 Surface roughness

  6. Results A-sanding surface, B-planning surface, C-oblique cutting surface planning surface sanding surface oblique cutting surface Fig.3 SEM observation of machining surface The surface structure of wood was crushed or torn after planning. The damage surface could removed by the two-step oblique cutting

  7. Conclusions The planning surface processed by oblique cut once more could remove the deformation layer of surface to show the wood structure clearly Obtain a more fine and smooth surface.

  8. Thank you for your listening!

More Related