1 / 8

Fluid Dynamics: Boundary Layers

Fluid Dynamics: Boundary Layers. Analogous Equations if two normalized (dimensionless) equations take the same form the equations are analogou s. Reynolds Analogy.

marin
Download Presentation

Fluid Dynamics: Boundary Layers

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Fluid Dynamics: Boundary Layers • Analogous Equations • if two normalized (dimensionless) equations take the same form the equations are analogous Reynolds Analogy • The momentum and energy boundary layer equations are analogous if there is a negligible pressure gradient (dp*/dx* ~ 0) and the Pr ~ 1 • Given equivalent boundary conditions, the solutions take the same form

  2. Fluid Dynamics: Boundary Layers Reynolds Analogy Defining a new non-dimensional number Stanton number • The Reynolds Analogyis defined as (whenPr =1) • The Reynolds Analogyimplies that under certain conditions (no pressure gradient, Pr = 1) if the velocity parameters are known than the heat transfer parameters can be determined (and vice versa) Modified Reynolds Analogy: Chilton-Colburn (empirical) Colburn j factor laminar flows: valid fordp*/dx* ~ 0 turbulent flows: generally valid without restriction ondp*/dx*

  3. External Convection: Overview average Nusselt number local Nusselt number • Determining Heat Transfer Coefficients • determining heat transfer coefficients requires an accurate knowledge of the flow field • few (pseudo-)analytical solutions exist (especially for turbulent flow) • similarity solutions, etc. • heat transfer coefficient relations are largely empiricaland are presented based on the Nusselt number • The Nusselt number (and heat transfer coefficient) are functions of the fluid properties (ν, ρ, α, c, kf) • the effect of variable properties may be considered by evaluating all properties at the film temperature • most accurate solutions often require iteration on the film properties

  4. Fluid Dynamics: Boundary Layers • Laminarand turbulentboundary layers have different heat transfer characteristics • turbulent mixing typically increases heat transfer Critical Reynolds numberapproximates the location where the flow transitions from laminar to turbulent flow external (flat plate) flow internal (duct) flow • Transition

  5. Fluid Dynamics: Boundary Layers Transition leads to a significant increase in the local heat transfer coefficient • Transition

  6. External Convection: Overview Determining external flow conditions compute: compare to critical Reynolds number external (flat plate) flow laminar flow along length of flat plate transition to turbulent flow at critical length External Flows • boundary layers develop freely without constraint (compare to a internal/duct flow) • boundary layer may be laminar, laminar and turbulent, or entirely turbulent • simplest external flow: flat plate in parallel flow

  7. External Convection: Overview laminar free stream & smooth plate Average parameters • Transition to Turbulence • critical Reynolds number affected by free stream turbulence and surface roughness of plate • nominally • if the boundary layer is “tripped” at the leading edge: • flow is turbulent along entire length of flat plate

  8. External Convection: Overview delays thermal boundary layer growth • Thermal Conditions at the Surface (idealized) • uniform heat flux • uniform surface temperature • unheated starting length

More Related