1 / 9

Paint Circulation Technology Level 1 - Training Document

Paint Circulation Technology Level 1 - Training Document. Subject Matter Expert: Miguel Bahena. What Is A Paint Circulating System. A pressurized vessel used to transport material to various locations. More efficient then manual moving material to individual locations. What Are We Doing?.

Download Presentation

Paint Circulation Technology Level 1 - Training Document

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Paint Circulation TechnologyLevel 1 - Training Document Subject Matter Expert: Miguel Bahena

  2. What Is A Paint Circulating System A pressurized vessel used to transport material to various locations. More efficient then manual moving material to individual locations.

  3. What Are We Doing? Moving material from point A to point B. Supply material fluid pressure. Supply material fluid flow. Maintain material integrity. That is all we do! Sounds simple doesn’t it?

  4. What Are We Doing? Point A Point B

  5. PAINT MIX ROOM • The martial that is used for painting the vehicles is a solvent borne material which is extremely flammable. The paint is stored and pumped from a paint mix room. • MIX ROOMS ARE CLASS 1 DIVISION 1 AREAS – NO ELECTRIC ITEMS ARE ALLOWED IN THIS ROOM INCLUDING – (CELL PHONES, FLASH LIGHTS, RADIOS, ETC). UNLESS APPROVED BY FORD SAFETY Tote storage rack Tote stand for loading material Bulk Storage Tank for Solvent and Waste Typical circulation system Typical paint mix room

  6. Typical Paint Circulation System Components Transfer Pump Surge Chamber Day Tank BPR Pump Supply Line Tote Tank Return Line Booth Drops Heat Exchanger

  7. PAINT CIRCULATION HEADER • The paint is pumped from the paint circulation module to the spray booths in what is called a header system. The headers system is constructed from stainless steel pipe/tubing and delivers paint to each robot or manual spray station. • At each robot or manual station, a line tee’s off the header to feed this station. This is called a drop/paint station. Typical paint circulation header

  8. PAINT HEATEXCHAGNER SYSTEM • The paint must be applied to the vehicle at the correct temperature. A paint heat exchanger system is used to maintain a temperature of +/- 2 degrees F Tube and shell heat exchanger Water supply and return lines Water conditioning skid

  9. WASTE COLLECTION SYSTEM • Each time the robot or manual station changes color a certain amount of waste is generated. This waste is collected at the paint booth in a waste collection system. Special Waste Collection Funnel Under Cap Cleaner to Flush Drop Legs and Prevent Debris from Entering Waste Header Recirculation of the header and drop legs are very important Gravity Waste Header Fabricated from 2” S.S. Tubing Utilizing Sanitary Fittings for Smooth ID and Ease of Maintenance. Line Installed at ¼” – 3/8” per foot to maintain proper drain velocity Ball Valves Added to Header to Have the Ability to Power Flush Header for Preventative Maintenance Purge Solvent Piped to Tank so Virgin Solvent Can be Added for Cleaning. A Catalyst Stop can be Substituted to Prevent the Catalyst from Curing (paint supplier can recommend material) Special Cage Inside Tank to Capture 2K Waste Debris From Clogging Pumps Utilize (1) Pump for Recirculation and (1) Pump for Empting of the Tank Note: Containment Pan Not Shown

More Related