1 / 2

Quick guide in adjusting the Gridmaster mats

Quick guide in adjusting the Gridmaster mats. Trimming the Gridmaster in width (LTR) : cut the Gridmaster-modules by jigsaw. In this case there is no need to adjust or re-do the wires!. Quick guide in adjusting the Gridmaster mats.

nasia
Download Presentation

Quick guide in adjusting the Gridmaster mats

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Quick guide in adjusting the Gridmaster mats Trimming the Gridmaster in width (LTR) : cut the Gridmaster-modules by jigsaw In this case there is no need to adjust or re-do the wires!

  2. Quick guide in adjusting the Gridmaster mats Trimming the Gridmaster in walklength (FTB) tools needed: cutting pliers and bending pliers Clamping screw Carefully cut the wires as shown on picture by pliers. This will cause the mat to loose its tension and you are now able to remove a set of rubber/alu profiles including the endprofile After removing a set of rubber and alu. Slide the removed end profile back on the steel wires. Put pressure on the mat by using a clamping screw or similar device Bend the wires tight in a 90 degree angle. And remove the clamping screw.

More Related