1 / 3

L ext.

Original CLIC Module. Easy way #1. L total=2xLactive+ 2xL ext. +Ld + Lm. Ld. Lm. L active. L ext. L total=2xLactive+ 2x55.6+ 11 + 8. L total (34 cells/PETS)= 556 mm Quad/BPM/flanges available = 407 mm.

navid
Download Presentation

L ext.

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Original CLIC Module Easy way #1. L total=2xLactive+ 2xL ext. +Ld + Lm Ld Lm L active L ext. L total=2xLactive+ 2x55.6+ 11 + 8 L total (34 cells/PETS)= 556 mm Quad/BPM/flanges available = 407 mm CLIC Module in TBTS 1 PETS x Quad., direct scaling from existing one with increased (to be kept in layout) length: L total= L’ active+ L ext. + Lm Lm L’ active = 500.2 (80 cells)

  2. Easy way #1. continued With longer active length (80 cells) and drive beam current 30 A and bunch length of 1 mm, the power produced with a single PETS is 63 MW! Practically enough (cf. 65 MW) to feed one single structure! However the 25 A is more reasonable value (Roberto’s) so if we can increase the length by 10 cm – up to 600 mm (97 cells)? This will be straightforward scenario, I think we can feet this new length, if the PETS BPM are not there, or rather short (or shorter quadrupole, or even single quadrupole). So the module 1 PETS x 1 AS structure (6 empty structures): Quad 34 cm 25 A 600 mm + Lext +Lm =664 mm 65 MW 65 MW Another way to keep the 500 mm/PETS, is to modify PETS design – PETS with reduced aperture: from 23 mm diameter to 20.8 mm diameter. This will require quite a design work: new matching cells (extractor can be kept as it is). BUT still possible (CIEMAT can do design modifications – good chance)!!! Note: PETS produces 0.5 power and only 2 structures accelerates

  3. Not very Easy way. As a boundary we still can keep the module layout similar to CLIC, So that 4 PETS/module of original length 34 cell (213 mm). To feed now 4 structures: 1 PETS/structure, the PETS aperture must be reduced from 23 mm diameter down to 13.6 mm (beta=18%!) in order to recover factor 4 in current with 0.5 the power to be produced! 25 A 13.6 mm PETS 65 MW 65 MW 65 MW 65 MW Note: Completely new PETS design (not sure even if now octants could work), As well, compare it to the 50 MW klystron with aperture ~ 15.5 mm diameter.

More Related