1 / 12

The 16th International Conference ELECTRONICS‘2012

The 16th International Conference ELECTRONICS‘2012. Real-time control system for various applications using sensor fusion algorithm. Authors: Edgaras Artemciukas , Rimantas Plestys , Konstantin Gerasimov , Evaldas Zulkas , Linas Pasviestis , Arunas Andziulis, Aigars Krauze.

nibaw
Download Presentation

The 16th International Conference ELECTRONICS‘2012

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. The 16th International Conference ELECTRONICS‘2012 Real-time control system for various applications using sensor fusion algorithm Authors: Edgaras Artemciukas, Rimantas Plestys, KonstantinGerasimov, Evaldas Zulkas, Linas Pasviestis, Arunas Andziulis, AigarsKrauze 2012, Palanga (18-20 June)

  2. Micro-electromechanical sensory system analysis Fig. 1. Typical applications

  3. Digital micro-electromechanical sensor selection Table 1. Digital microelectromechanical sensor parameters Fig. 2. Digital accelerometer, gyroscope and magnetometer

  4. Microcontroller selection Fig. 3. Arduino prototyping platform

  5. System model • Fig. 4. Model of real-time control system prototype (1) , (2) (angle); angle measurement with gyroscope.

  6. System algorithm Fig. 5.Sensor fusion algorithm

  7. System implementation a) Sensor readings 3D object control in real-time Arduino Microcontroller Accelerometer ADXL345 Gyroscope ITG-3200 b) c) d) Fig. 6. (a) Prototype of real-time remote control system and visualization of virtual 3D objects; real-time control of 3D object: (b) – horizontal state; (c) – x-axis roll to the left and right (d)

  8. Research results Fig. 7. Experiment results

  9. Application for various systems a) b) c) Fig. 8. a) inertial computer mouse prototype; b) UAV stabilization system; c) Augmented reality system

  10. Tilt according to x ir y axis Horizontal ir vertical position change

  11. Acknowledgment • The authors would like to thank the LATLIT programmeproject LLII-061 for the support while writing and publishing the manuscript.

  12. Thank You for Your Attention

More Related