1 / 9

Optical Beacon Status

Optical Beacon Status. ANTARES Calibration Workshop 4/12/2007, CERN, Geneva. Laser ARS_T0 computation in the DR. ARS_T0 correction method. Studies about flashing procedure. OM gain reduction check with LOB. Conclusions & Plans. Paco Salesa IFIC (CSIC – Universitat de València).

Download Presentation

Optical Beacon Status

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Optical Beacon Status ANTARES Calibration Workshop 4/12/2007, CERN, Geneva • Laser ARS_T0 computation in the DR. • ARS_T0 correction method. • Studies about flashing procedure. • OM gain reduction check with LOB. • Conclusions & Plans. Paco Salesa IFIC (CSIC – Universitat de València)

  2. Laser ARS_T0 estimation in the DR • There will be 2 new Laser Beacons for Line 7 and 8 located at the anchor. These Beacons will complement the LOB calibration. • The new Laser model emit at l = 532 nm and its intensity is variable (for more details see the internal note: ANTARES-Cali/2007-004). • The T0 for the ARS reading the internal photodiode was measured for both Laser Beacons using as reference a LOB. • The offsets computed are: 48.0 ± 0.6 ns for Line 7, and 43.0 ± 0.6 ns for Line 8. LINE 7 LINE 8 LOB –Laser OB (ns) LOB –Laser OB (ns)

  3. ARS_T0 correction method • Compute time differences ARS-LOB for the several storeys above the LOB (Line divided in 4 regions). • Fit the values to a straight line as suggested by the studies about early photon (the storey where the LOB is placed is not taken into account). • For each storey correct one ARS_T0 value by using the fit. • The other 5 ARS_T0s remaining corrections in each storey are obtained from the intra-storey relative correlations. OM 0 OM 1 OM 2

  4. Check of the LOB-ARS fit Only 4 storeys used in the fit OM-OM OM-OM (correction) 2 4 6 8 10 2 4 6 8 10 As a check of the fit we can take directly the fitted values as the good ones (this will not be the final ARS_T0 correction!) +

  5. Check of the LOB-ARS fit • The correction is not so good for the last storeys. • Taking only the correction from the fit improves the values of the OM-OM intra-storey correlation.

  6. Studies about flashing procedure 1 RUN = 1 LOB flashing 1 RUN = 2 LOBs flashing OM-OM intra-storey correlation using one LOB per run is in agreement with the values obtained when flashing two LOB per run (LOB S.2 + S.15 & LOB S.9 + S. 21)

  7. Studies about flashing procedure • Test with 4 LOBs flashing simultaneously performed in Lines 3 & 4. • The LOB rate and AVC & TVC distributions are the same for the case where 1 LOB is flashing and for the case where 4 LOBs are flashing. • A secondary peak appears in some TVCs distribution of the OMs, not yet understood. OMs L4 S11 ? ? ?

  8. OM gain preliminary checks OM 0 • The LOB-OM time difference evolution in time give hints about OM gain changes. • The effects seems to go in the expected way. If the gain decreases the time dif. increases (walk effect). • Difficult to quantify and the comparison with K40. K40

  9. Conclusions & Plans • The ARS_T0s for the Laser Beacons computed. The results are similar for Line 7 and 8. • The new Laser OBs will complement the ARS_T0 computation with LED OBs. • ARS_T0 correction method presented. Some checks shown. • Using intra-storey correlation + line fit, the values of the ARS_T0s will be updated in the DB. • Multi-LOB flash for 2 LOB per run seems ok, not for 4 LOB per run. More studies needed. • Preliminary studies about OM gain changes using LOBs done. Work in progress.

More Related