1 / 36

Chapter 3 - Joint and Materials Mechanics

Artificial hips. Chapter 3 - Joint and Materials Mechanics. Shoe impact tester. Joint Motion. Anatomical Position Planes Sagittal Frontal Transverse. Mobility and ROM. ROM joint & person specific Injuries: excessive ROM Factors affecting ROM:

Download Presentation

Chapter 3 - Joint and Materials Mechanics

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Artificial hips Chapter 3 - Joint and Materials Mechanics Shoe impact tester

  2. Joint Motion • Anatomical Position • Planes • Sagittal • Frontal • Transverse

  3. Mobility and ROM • ROM joint & person specific • Injuries: excessive ROM • Factors affecting ROM: • Shape and geometry of articulating surfaces • Joint capsule and ligaments • Surrounding muscles • Apposition of body parts • Joint Stability

  4. Lever Systems R F • Rigid rod fixed at point to which two forces are applied • 1st class • 2nd class • 3rd class • Functions •  applied force •  effective speed F R R F

  5. Instantaneous Joint Center • Caused by asymmetries in the joint motion • Basic movements • rotation • sliding • rolling

  6. Moment of Force & Joint Motion • Moment = F ·d • Moment = muscular activity, essential for controlling joint motion • Theory: actions at joints can be represented by the resultant joint force and the resultant joint moment

  7. Resultant Joint Force vs Bone-on-Bone Forces • RJF: Net force across the joint produced by bone, ligaments, muscle etc. • Bone-on-Bone: more complex calculation

  8. Material Mechanics • Rigid body mechanics: body segments are considered rigid structures (non-deformable) • fixed center of mass • homogeneous material • Used to analyze movements • Easier to model and provide a reasonable approximation

  9. Deformable solids • Segment or tissue analyzed undergoes deformation • More complicated analysis and difficult to model

  10. Material Properties • Basic properties • Size • Shape • Area • Volume • Mass • Derived • Density • Centroid

  11. Stress • Stress (): internal resistance to an external load • Axial (compressive or tensile) =F/A • Shear  = F/A (parallel or tangential forces) • Units Pascal (Pa) = 1Nm2 Axial Shear

  12. Strain • Change in shape or deformation () • Absolute strain • Relative strain • L/Lo

  13. Stress &Strain • Stress-strain ratio: stiffness or compliance of the material • E = /  • Linear material • Hooke’ law:  = E·  • Biological material non-linear due to its tissue fluid component (viscoelastic properties) A  B 

  14. Uniaxial Loading E • Simplest form: forces applied along single line typically the primary axis • compressive • tensile • shear • Stress-strain curve • Linear region (B) • elastic limit (C) • yield point (D) • ultimate stress (E) • Rupture (F) • Energy stored (area) D F C B  

  15. Poisson’s effect Force • When a body experiences an uniaxial load its axial & transverse dimensions will change, • v = -(t/ a)

  16. Multiaxial Loading • Deformation in all three directions • Net effect of the strains • Shear stresses

  17. Bending • Long bones: beams • Compressive stress: inner portion • Tensile stress: outer portion • Max stresses near the edges, less near the neutral axis T C axis axis y x=(Mb·y)/I

  18. Bending Moments • Shear stresses max at neutral axis and zero at the surface •  = (Q·V)/(I ·b) • Q= area moment • V= vertical shear force Q y h b

  19. Bending • Three point bending • failure at middle • ski boot fracture • Four point bending • failure at the weakest point between two inside forces

  20. Bending • Cantilever bending • Compressive force acting off-center from long axis

  21. Torsion • Twisting action applied to a structure • Resistance about long axis determined by polar moment of inertia • J=[·(r4o-r4i)]/2 • Shear stress along the shaft =(T·r)/J • Twist angle: =(T·l)/(G·J)

  22. Torsion • Larger radius of the shaft, greater resistance • Stiffer the material harder to deform • In addition to shear stress, normal stress (tensile & compressive) are produced in a helical path (spiral fractures) r

  23. Viscoelasticity • Provided by the fluid component in biological tissue • Resistance to flow • Affects stress-strain • Increase in strain rate produces-increases stiffness of the material

  24. Viscoelasticity • Pure elastic material • strain energy returned • no energy loss • Viscoelastic tissues • lose energy due to heat • energy is not returned immediately • Resilient • Dampened • Hysteresis: area representing energy lost Elastic Load  Non unload 

  25. Viscoelasticity creep • Creep response • Stress-relaxation response • Effects of strain-rate on stress relaxation   Time

  26. Material Fatigue & Failure Initial cycle effect • Fatigue: repeated loads above a certain threshold • Continued loading: failure • First cycle effect: shift in mechanical response 1 2 3 n  

  27. Material failure • Distribution of stresses • Discontinuity (stress risers) • fractures sites • screws • osteotendinous junctions • Ductile vs Brittle materials • Failure theories • maximal normal stress • maximal shear stress • maximal energy distortion

  28. Biomechanical Modeling & Simulation • Model: representation of one or more of an object’s or system’s characteristics using mathematical equations • Goal • improve understanding of a system • Simulation:process of using validated model

  29. Biomechanical Modeling & Simulation • Physical model: simulates actual conditions, crash test dummies • Mathematical or computer model: conditions are represented using mathematical equations

  30. Why use a model? • Easy to duplicate • Easy to make change in the system • Time • Economic factor

  31. What questions is being posed? Type: molecular, tissue, organ etc. Deformable or rigid finite or continuoum static, quasi static or dynamic Linear or nonlinear 2D or 3D Determined or stochastic kinematics or kinetics inverse or direct How to select a model?

  32. Model & Simulations • Models are simplifications of actual situations • Model and simulation are as good as the data use as input • Stability of the model (range of values)

  33. Finite-element modeling • Structures are represented as simple blocks assembled to form complex geometrical structures • Connected at poinst (nodes) forming a mathetical representation of the structure • Forces are applied at the structure and stress and strain are predicted • Complex and requires a great deal of computing power

  34. Finite modeling

  35. Rheological Models • Study of deformation and flow of matter • Use to model biological tissue • Interrelate stress, strain, and strain rate • Three types • Linear spring • dashpot • frictional • Linear spring • elastic properties of tissue  

  36. Rheological Models • Dashpot • loading response that is strain rate dependent • fluid viscosity (newtonian fluid) •  = · • Frictional element • Combinations of models   Strain rate  

More Related