1 / 25

PSPICE Tutorial

PSPICE Tutorial. Introduction. SPICE ( S imulation P rogram for I ntegrated C ircuits E mphasis ) is a general purpose analog circuit simulator that is used to verify circuit designs and to predict the circuit behavior.

omer
Download Presentation

PSPICE Tutorial

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. PSPICE Tutorial

  2. Introduction • SPICE (Simulation Program for Integrated Circuits Emphasis) is a general purpose analog circuit simulator that is used to verify circuit designs and to predict the circuit behavior. • PSpice is a PC version of SPICE and HSpice is a version that runs on workstations and larger computers. • PSpice has analog and digital libraries of standard components (such as NAND, NOR, flip-flops, and other digital gates, op amps, etc) which makes it a useful tool for a wide range of analog and digital applications.

  3. Types of Analysis • Non-linear DC analysis • Non-linear transient analysis • Linear AC Analysis • Noise analysis • Sensitivity analysis • Distortion analysis • Fourier analysis • Monte Carlo Analysis

  4. Circuit Components available • Independent and dependent voltage and current sources • Resistors • Capacitors • Inductors • Mutual inductors • Transmission lines • Operational amplifiers • Switches • Diodes • Bipolar transistors • MOS transistors • JFET • MESFET • Digital gates

  5. Terminologies • Subcircuit:A subcircuit allows you to define a collection of elements as a subcircuit (e.g. an operational amplifier) and to insert this description into the overall circuit. • EDIF: Electronic Design Interchange Format, a standard published by EIA. Usually used for netlists.

  6. File structure PSPICE (Capture) • Input file for PSpice that has the file type “.CIR” • When a circuit is simulated “.OUT” is generated • “*.DAT” file is by default a binary file to see the data • “*.LIB” files where the details of complex parts are saved • Additional files • *.SCH (the schematic data, itself) • *.ALS (alias files) • *.NET (network connection files)

  7. Libraries • These are files that contain reusable part data. • They can be custom or default ones • Some of the libraries available in the Evaluation version of PSPICE are: • abm.slb for special functions like square root and multipliers • analog.slb for analog components like resistors and capacitors • breakout.slb for pots • connect.slb, .plb for connectors • eval.slb, .plb for semiconductor, digital devices, switches • port.slb for grounds, high/low digital ports • special.slb for ammeters, viewpoints • source.slb for various analog and digital sources

  8. Parts • Part is a basic building block which may represent • One or more physical element • Function • Simulation model • When a part is placed for first time its entry is done in “Design Cache” What is “Design Cache”????... Go and Find Out Yourself 

  9. Design Structure • Flat Design • Small designs • All pages in same schematic • Off Page connectors are used • Figure shows design hierarchy

  10. Contd…… • Hierarchical Design • Much complex designs • Symbols are created called “Hierarchical Blocks”

  11. Things to remember before starting • PSpice is not case sensitive • All element names must be unique • There must be a node designated "0" (Zero). This is the reference node against which all voltages are calculated. • If any change is made in circuit make sure you create netlist again before simulating it.

  12. Getting Started • File  New  Project  Analog or Mixed A/D Make sure to choose Analog or Mixed A/D and proper location for project

  13. Next comes following window Make sure you select “Create a blank project”

  14. This is how a typical “Schematic” Window will look like

  15. Now start placing components and connecting them (this part is quite similar to what you have done in last semester’s lab) Add a library as per the requirement for eg. here analog library has been added

  16. After completing the circuit save it and run it. • Plot appropriate waveform by probing on circuit.

  17. Design Example • Take example of a high pass filter (RC) • First we will follow initial steps of creating a new project • Now placing the components.

  18. Place the components

  19. Place the source and ground

  20. Add Probe Probes

  21. Creating new simulation profile • Go to PSPICE  New Simulation Profile • Give a name to profile and create

  22. AC Analysis • We can choose any of the analysis and options • Here AC analysis is done to see operation of filter

  23. Run • Go to PSPICE  Run • Another waveform window will come up See this window to keep track of current simulation

  24. Result

  25. Happy Learning 

More Related