1 / 12

The Modified MiniMill™

Room 3-470 77 Massachusetts Ave. Cambridge, MA 02139. Phone: (617) 253-1953 Fax: (617) 258-6427 http://pergatory.mit.edu/. The Modified MiniMill™. A small milling machine with linear motors and air bearing. By: Roger Cortesi rcortesi@mit.edu http://pergatory.mit.edu/rcortesi/.

ophrah
Download Presentation

The Modified MiniMill™

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Room 3-470 77 Massachusetts Ave. Cambridge, MA 02139 Phone: (617) 253-1953 Fax: (617) 258-6427 http://pergatory.mit.edu/ The Modified MiniMill™ A small milling machine with linear motors and air bearing. By: Roger Cortesi rcortesi@mit.edu http://pergatory.mit.edu/rcortesi/ Precision Engineering Research Group Massachusetts Institute of Technology, Mechanical Engineering Department

  2. Using the Axtrusion™ as a building block, create a desktop Milling Machine “I will call it… MiniMill™”

  3. MiniMill™ Functional Requirements • A part accuracy of 0.001” (25.4 mm) • A work volume of 300 x 300 x 300 mm • A manufacturing cost of $20,000

  4. MiniMill™ Prototype Budget Materials Assume that the in-production manufacturing cost between 30 and 50% of the prototype cost.

  5. MiniMill™ Production Budget Estimated Material Costs

  6. Some Competing Machines The Compact DMC™ (left), and the XV Tabletop™ (middle) Machining Centers by Defiance. The Benchman™ Series (right) by Light Machines.

  7. Space Efficiency • Three times the Work Vol / Machine Vol of other small machines • Twice the Work Vol / Floor Space of DMC Compact Center™ • Four times the Work Vol / Floor Space of the Other Machines

  8. Some Other Initial Concepts Sawyer Motor for the X & Y Directions. Traditional or Combined Unit for the Z axis and Spindle Two Axtrusions on the base (X &Y) and an Axtrusion for the Z axis.

  9. Two L’s Used to Make Machine

  10. MiniMill™, The Final Concept One Axtrusion on the Base (X) One on the Gantry (Y) and one for the Z This allows for two identical “L”s to make the structure.

  11. Final Concept Features • Only Four (4) Major Parts • “Hot” Swappable Spindle Interface • Auto-Tool Changer Easily Accommodated • More Crash Resilient

  12. The Model Results(via a MatLab script) Error at the Tool Tip (microns) vs. Tool Position

More Related