1 / 22

A loss detection Service for Active Reliable Multicast Protocols

A loss detection Service for Active Reliable Multicast Protocols. Moufida MAIMOUR & C. D. PHAM INRIA-RESO RESAM UCB-Lyon – ENS Lyon. Tuesday, July 16th, 2002. INC’02, Plymouth. Outline. Introduction The DyRAM protocol The active loss detection service

oscar-cantu
Download Presentation

A loss detection Service for Active Reliable Multicast Protocols

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. A loss detection Service for Active Reliable Multicast Protocols Moufida MAIMOUR & C. D. PHAM INRIA-RESO RESAM UCB-Lyon – ENS Lyon Tuesday, July 16th, 2002 INC’02, Plymouth

  2. Outline • Introduction • The DyRAM protocol • The active loss detection service • An active-based reliable multicast architecture • Some results (analysis, simulation, implementation) • Conclusion

  3. From unicast… Sender • Problem Sending same data to many receivers via unicast is inefficient. data data data data data data Receiver Receiver Receiver

  4. …to multicast on the Internet. Sender • Problem Sending same data to many receivers via unicast is inefficient. data data data • Solution Using multicast is more efficient data Receiver Receiver Receiver

  5. Reliable multicast • At the routing level : IP Multicast provides efficient delivery without any reliability guarantees. • Many multicast applications require reliability. • Reliability has to be addressed at a higher level.

  6. Reliable multicast protocols • End-to-end solutions : Only the end hosts (the source and/or the receivers) are involved. • In-network solutions : Routers are involved in the recovery process. Active routers-based solutions

  7. What are active routers ? Active routers are able to perform customized computations on the messages flowing through them.

  8. DyRAM main characteristics • DyRAM is based on active services (router-assisted). • the recovery is performed from the receivers (no data cache at the routers) • A recovery tree is constructed on a per-packet basis via a replier election mechanism. • Use of NACKs combined with periodic ACKs.

  9. Main Active Services in DyRAM • NACK suppression • Subcast of repair packets • Dynamic replier election

  10. NACK4 NACK4 data4 NACK4 NACK4 only one NACK is forwarded to the source NACK4 NACKs suppression

  11. NAK 2 from link2 NAK 2 from link1 IP multicast IP multicast IP multicast IP multicast IP multicast NAK 2 Repair 2 NAK 2,@ Repair 2 NAK 2 NAK 2,@ NAK 2,@ NAK 2 Repair 2 Replier election and subcast D0 DyRAM 0 2 1 D1 DyRAM Repair 2 R1 1 0 R2 R3 R4 R5 R7

  12. NACK4 NACK4 data4 NACK4 NACK4 A NACK is sent by the router NACK4 The active loss detection service

  13. The active loss detection implementation The Track List (TL) structurewhich maintains for each multicast session, • lastOrdered :the sequence number of the last received packet in order • lastReceived :the sequence number of the last received data packet • lostList :list of not received data packets in between.

  14. The active loss detection implementation (cont.) • On reception of a data packet with a sequence number seq > TL.lastOrdered+1 • for each lost data packet (TL.lastOrdered < lostseq < seq & lostseq Є TL.lostList), • send a NACK for lostseq toward the source. • ignore similar NACKs from downstream links for a given period.

  15. Where to place the active routers ?

  16. ISDN xDSL PSTN GSM, UMTS 10Mbits/s core network Gbits/s Server 100Mbits/s wireless LAN 1Mbits/s, 10MBits/s visio-conferencing

  17. Location of the loss detection-capable routers • The loss detection service should be located not too far from the source so the corresponding overhead is justified !

  18. Specialized active routers architecture source The active router associated to the source can perform early processing on packets. core network Gbits rate A hierarchy of active routers can be used for processing specific functions at different layers of the hierarchy : NACK suppression, subcast, replier election.

  19. Simulation model

  20. Simulation results 4 receivers/group #grp: 6…24 p=0.25 #grp: 6…24

  21. DyRAM implementation • Tamanoir execution environment • Java 1.3.1 and a linux kernel 2.4 • A set of receivers and 2 PC-based routers (Pentium II 400 MHz 512 KB cache 128MB RAM) • Active processing cost of a • data packet : 20 micro sec • NACK packet : 135 micro sec • repair packet : 123 micro sec

  22. Conclusion & future work • Reliability on large-scale multicast session is difficult. Active services at the edges can provide efficient solutions for reducing implosion, recovery delays and exposure problems and so achieving scalability. • Optimizing the replier election based on an estimation of the receivers power (by means of BW, delay …) • A congestion control is currently under evaluation and will be integrated into DyRAM in the near future.

More Related