1 / 13

API 20E

API 20E. The API 20E System. The API 20E System is miniaturized version of conventional tests that is used for the identification of members of the family Enterobacteriaceae and other gram-negative bacteria. This system utilizes a plastic strip with 20 separate compartments.

pamc
Download Presentation

API 20E

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. API 20E

  2. The API 20E System • The API 20E System is miniaturized version of conventional tests that is used for the identification of members of the family Enterobacteriaceae and other gram-negative bacteria. • This system utilizes a plastic strip with 20 separate compartments. • Each compartment consists of a depression, or cupule, and a small tube that contains a specific dehydrated medium

  3. Inculcation • To inoculate each compartment it is necessary to first make up a saline suspension of the unknown organism; then, with syring, each compartment is filled with the bacterial suspension. • The cupule receives the suspension and allows it to flow into the tube of medium. • The dehydrated medium is reconstituted by the saline. • To provide anaerobic conditions for some of the compartments it is necessary to add sterile mineral oil to them. • After incubation for 18–24 hours, the reactions are recorded, test reagents are added to some compartments, and test results are tabulated.

  4. Materials • Agar slant or plate culture of unknown • Test tube of 5 ml 0.85% sterile saline • API 20E test strip • API incubation tray and cover • Squeeze bottle of tap water • Mineral oil • Syringe. • Oxidase test reagent

  5. If you haven’t already done the oxidase test on your unknown, do so at this time. • It must be established that your unknown is definitely oxidase negative before using this system. • Prepare a saline suspension of your unknown by transferring organisms from the center of a well-established colony on an agar plate (or from aslant culture) to a tube of 0.85% saline solution.

  6. Dispense about 5 ml of tap water into the tray with a squeeze bottle. Note that the bottom of the tray has numerous depressions to accept the water. • Vortex mix the saline suspension to get uniform dispersal • Inoculate all the tubes on the test strip with the pipette by depositing the suspension into the cupules as you tilt the API tray

  7. Important • Slightly under fill ADH, LDC, ODC, H2S and URE. (Note that the labels for these compartments are underlined on the strip.) Under filling these compartments leaves room for oil to be added and facilitates interpretation of the results. • Since the media in |CIT|, |VP|, and |GEL| compartments require oxygen, completely fill both the cupule and tube of these compartments. • Note that the labels on these three compartments are bracketed as shown here.

  8. Results • Each chemical test give specific color • The result readied as number of 7 digits • This No is matched with tables or with computer program to identify the bacteria Animation

More Related