1 / 22

An Introduction

An Introduction. Objective. Understand the difference between CMM & CMMI Understand the Structure of CMMI. Integration of. Integrate Source Models SW CMM v2.0c EIA/IS 731 SECM IPPD CMM draft v0.98 Consistent with ISO 15504. puneetd:

Download Presentation

An Introduction

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. An Introduction

  2. Objective • Understand the difference between CMM & CMMI • Understand the Structure of CMMI.

  3. Integration of • Integrate Source Models • SW CMM v2.0c • EIA/IS 731 SECM • IPPD CMM draft v0.98 • Consistent with ISO 15504 puneetd: EIA Interim Standard 731, system engineering capability model puneetd: Integrated Product & Process Development Capability Maturity Model

  4. Different Standards under CMMI • Different body of Knowledge • Software (SW) • System Engineering (SE) • Integrated Product and Process Development (IPPD) • Supplier Sourcing (SS) • Standards are combinations of different body of knowledge

  5. Different Standards under CMMI • Software (SW) • Covers the development of software systems. • System Engineering (SE) • Development of total systems, which may or may not include software. • Focus is on transforming customer needs, expectations and constraints into product solutions and support them. • Integrated Product and Process Development (IPPD) • Contains – Process Management • Project Management • Support • Engineering Processes • Supplier Sourcing (SS) – Use suppliers to perform functions or modifications to product.

  6. Changes from SW CMM v1.1 • Inclusion of Systems Engg. • Two Representations • New Process Areas (22/cmmi versus 18/cmm) • New Generic Goals • New Practices

  7. Representation • Staged • 5 Maturity Levels • From SW CMM • Continuous • 6 Capability Levels • From EIA/IS 731 ISO 15504

  8. Representation – Difference • Staged Representation – • We have the (Maturity Level)MLs as they are found in CMM. • Process Areas are assigned to the UPPER fours of the five maturity levels (Managed, Defined, Quantitatively Managed, Optimizing) • Provides a pre- defined roadmap for organizational improvement.

  9. Representation – Difference • Continuous Representation – • Maturity Levels are replaced by Capability Levels (CL’s) as a measure assigned individually to each PA. • Provides maximum flexibility for organizations to choose which processes to emphasize for improvement.

  10. Staged

  11. Continuous

  12. Comparison • Continuous Staged • Representation Representation • Level Capability Levels Maturity Levels • 0 Incomplete N/A • 1 Performed Initial • Managed Managed • Defined Defined • 4 Quantitatively Quantitatively • Managed Managed • 5 Optimizing Optimizing

  13. Process Area • Process Area (PA) is a cluster of related practices. • Practices are actions to be performed in order to achieve the goals of a process area. • They are the major building blocks in establishing the process maturity of an organization. • Each process area resides at a specific maturity level.

  14. Level 2 (7 versus 6) Measurement & Analysis Level 3 (11 versus 7) Risk Management Requirements Development Technical Solution Product Integration Verification Validation Decision Analysis and Resolution Organizational Environment for Integration New Process Areas

  15. SW CMM Requirement Management S/w Project Planning S/w Project Tracking and Monitoring S/w Subcontractor Management S/w Quality Assurance S/w Configuration Management CMM I Requirements Management Project Planning Project Monitoring and Control Supplier Agreement Management Process and Product Quality Assurance Configuration Management Measurement and Analysis Process Area Comparison Level 2

  16. SW CMM Organizational Process Focus Organizational Process Definition Training Inter-group Coordination Integrated Software Management S/w Product Engineering Peer Reviews Process Area Comparison Level 3 • CMM I • Organizational Process Focus • Organizational Process Definition • Organizational Training • Integrated Project Management • Risk Management • Requirements Development • Technical Solution • Product Integration • Verification • Validation • Decision Analysis and Resolution

  17. Process Area Comparison Level 4 & 5 • SW CMM • Quantitative Process Management • S/w Quality Management • Defect Prevention • Technology Change Management • Process Change Management • CMM I • Organization Process Performance • Quantitative Project Management • Causal Analysis & Resolution • Organizational Innovation and Deployment

  18. Process Areas Organizational Innovation & Deployment Causal Analysis & Resolution 5 5 5 Quantitative Project Management Organizational Process Performance 4 4 4 Validation Verification Product Integration Technical Solution Requirements Development Risk Management Integrated Product Management Organizational Training Organizational Process Definition Organizational Process Focus Decision Analysis & Resolution 3 3 3 Requirements Management Supplier Agreement Management Project Monitoring and Control Project Planning Configuration Management Process & Product QA Measurement & Analysis 2 2 2 Engineering Project Management Process Management Support

  19. Structure of CMMI • Goal – A High level statement of the outcome to be achieved by effective implementation of group of practices. • Specific Goals - 47 • Generic Goals - 22 • The concept of goals in CMMI is the same as in SW-CMM. • All “Institutionalization related practices” satisfy “Generic Goals”.

  20. Structure of CMMI • Practices - A Description of expected actions to be performed in order to achieve the goals of a process areas. • Specific Practices – These differ across process areas and equivalent to “Activities” in CMM. • Generic Practices – These are common across all process areas and equivalent to “CO”, “AB”, VE” etc. • General Practices support the Generic Goal of each PA.

  21. Structure of CMMI • Common Features – They are a means of categorizing generic practices. • The categories are : • Commitment to Perform – Creating management policies and securing sponsorship. • Ability to Perform – Establishment and maintenance of plans, resources, assigning responsibility and authority and training. • Directing Implementation – Measurement, Control and performance practices. • Verifying Implementation – Ensure implementation and Compliance.

  22. Summary • Different Standards under CMMI • Changes from CMM to CMMI • 2 Representations • Comparison between Representations • Process Areas • Structure

More Related