1 / 27

Dental Amalgam: Material Properties and its Use in Clinical Dentistry

Dental Amalgam: Material Properties and its Use in Clinical Dentistry. What is Amalgam?. a·mal·gam : any alloy of mercury with another metal or other metals [silver amalgam is used as a dental filling] †

pauline
Download Presentation

Dental Amalgam: Material Properties and its Use in Clinical Dentistry

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Dental Amalgam:Material Properties and itsUse in Clinical Dentistry

  2. What is Amalgam? a·mal·gam: any alloy of mercury with another metal or other metals [silver amalgam is used as a dental filling]† †Source: Webster’s New World Dictionary of the American Language, Guralnik DB, Ed., New York: World Publishing Co., 1972.

  3. Types of Dental Amalgam • Copper amalgam (no longer used) • Conventional (low-copper) amalgam: formulation standardized in 1890’s • High copper amalgam: first developed in the 1960’s

  4. Alloy Powder Composition

  5. Alloy Powder: Dispersalloy® Mixing proportions: 50% alloy, 50% mercury

  6. Alloy Powder: Tytin® Mixing proportions: 57.5% alloy, 42.5% mercury

  7. Amalgam Capsules • Contain (in separate compartments): • powdered amalgam alloy • liquid mercury • Some are manually activated, others self-activated • Pestle usually included

  8. Amalgamator (Triturator) • Speeds vary upward from 3000 rpm • Times vary from 5–20 seconds • Mix powder and liquid components to achieve a pliable mass • Reaction begins after components are mixed

  9. Silver-Gold Phase Diagram

  10. Silver-Tin Phase Diagram

  11. Silver-Mercury Phase Diagram

  12. Reaction: Low-Copper Alloys Ag3Sn() + Hg Ag2Hg3(1) + Sn7-8Hg(2) + Ag3Sn()

  13. Reaction: High-Copper Alloys Ag3Sn() + Ag-Cu + Hg Ag2Hg3(1) + Sn7-8Hg(2) + Ag3Sn() + Ag-Cu and Sn7-8Hg(2) + Ag-Cu Cu6Sn5() + Ag2Hg3(1)

  14. Composition of Set Amalgam • Matrix of 1 (Ag2Hg3) and  (Cu6Sn5) phases, with embedded particles of unreacted  (Ag3Sn) and Ag-Cu phases • Not a “solid emulsion” (“...it is not correct to refer to an aggregate of intermetallic compounds, all of which are solid at room temperature, as a solid emulsion.” —Laurier Schramm, author of Dictionary of Colloid and Interface Science.)

  15. Properties of Mercury • Only liquid metal at room temperature • Evaporation rate • Theoretical maximum is 57.9 µg·cm2·s–1 from pristine, oxide-free surface into a vacuum (= 57,900 ng·cm2·s–1) • Measured rate in vacuum is ~40 µg·cm2·s–1 (= ~40,000 ng·cm2·s–1) • Oxidation of Hg lowers rate by factor of 1000

  16. Université Laval 3.7-m LMT

  17. Courtesy of E.F. Borra, Université Laval

  18. Hg Evaporation from Amalgam • Baseline Hg vaporization rate (unstimulated) from amalgam in humans is 0.027 ng·cm2·s–1 • Average vaporization rate (over 24-h period) in humans is 0.048 ng·cm2·s–1 • The evaporation rate of Hg from amalgam is 800–1500 times lower than from oxidized mercury

  19. Mercury Dose from Amalgam • Person with average number of fillings (7) would absorb ~1.6 µg/day • Person with a moderately high number of fillings (13) would absorb ~3 µg/day • According to EPA, absorbed dose of mercury from food, water, and air is 5.7 µg/day

  20. Jerome Mercury Vapor Analyzer • Used by many anti-amalgam dentists to measure intra-oral mercury vapor • Differences in sampling volumes and flow rates must be taken into account, or gross errors will result

More Related