1 / 12

Southern African Large Telescope Prime Focus Imaging Spectrograph

Southern African Large Telescope Prime Focus Imaging Spectrograph. Preliminary Control System Design Jeffrey W Percival University of Wisconsin - Madison. PFIS Block Diagram. Mechanical Requirements. 9 unique mechanisms Collimator (shared by both beams) Slit masks Wave plates

penney
Download Presentation

Southern African Large Telescope Prime Focus Imaging Spectrograph

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Southern African Large TelescopePrime Focus Imaging Spectrograph Preliminary Control System Design Jeffrey W Percival University of Wisconsin - Madison SALT PFIS Preliminary Design Review Control System

  2. PFIS Block Diagram SALT PFIS Preliminary Design Review Control System

  3. Mechanical Requirements • 9 unique mechanisms • Collimator (shared by both beams) • Slit masks • Wave plates • Cameras (Visible & IR) • Focus • Shutter (Visible beam only) • Etalons (2) • Gratings • Polarizing Beam Splitter • Filters • Camera Articulation SALT PFIS Preliminary Design Review Control System

  4. Mechanical Requirements • No servoed axes • No “real time” needs • Shutter is operated by detector subsystem • Simple motions: • In/Out • Rotate • Linear • Single-axis • Steppers & Pneumatics • Low duty cycles • COTS controllers and drivers SALT PFIS Preliminary Design Review Control System

  5. Mechanical Requirements • Actuators • Stepper motors: 4 + 7 (Visible) + 7 (IR) = 18 • Pneumatic Cylinders: 3 + 6 (Visible) + 5 (IR) = 14 • Encoders • Position: 2 + 4 (Visible) + 4 (IR) = 10 • Angle: 2 + 3 (Visible) + 3 (IR) = 8 • Index Marks: 4 + 7 (Visible) + 7 (IR) = 18 • Limit Switches: 2 * (5 + 13 (Visible) + 12(IR)) = 60 SALT PFIS Preliminary Design Review Control System

  6. Mechanism Interlocks • Mechanisms have interdependencies and restrictions. • Interlock Manager will enforce correct control • Hardware interlocks will backstop software SALT PFIS Preliminary Design Review Control System

  7. Control System Implementation Control System Experience • Hubble Space Telescope High Speed Photometer flight software • WIYN 3.5m Control System: GUI, Astrometric kernel, PID loops • Sounding Rocket Star Tracker control program • HPOL Spectropolarimeter: motors, wave plates, WIYN TCS interface Guiding Principles • Commercial-Off-The-Shelf (COTS) • SALT-compatible (OS, Language, hardware, documentation) Buy, not build: • PCs: high performance, low cost • Linux or Windows • LabVIEW Software environment • National Instruments PCI-based products SALT PFIS Preliminary Design Review Control System

  8. Control System Block Diagram • Modular • Low-level modules control actuators • Mid-level modules combine actuators into mechanisms • High-level modules apply constraints and manage configuration • Simulation built in at lowest level; allows higher levels to be prototyped and used early • High degree of common functionality will speed development SALT PFIS Preliminary Design Review Control System

  9. Control System Software • Modular, use LabVIEW Virtual Instrument (VI) modules in a hierarchical model • Simulation modes built in at actuator level • LabVIEW interface to Telescope Control System • LabVIEW interface to Detector Control System • LabVIEW VI for Etalon controllers delivered as part of Rutgers Etalon subsystem • Emphasize parallelism: Drive down reconfiguration time by operating mechanisms in parallel wherever possible SALT PFIS Preliminary Design Review Control System

  10. Failure Modes Overall strategy: No single-point failure modes • Software is 1st line of defense • Check for inconsistent state of sensors • Monitor encoders during motion, check for expected direction and speed • Hardware interlocks are next • Soft limits for software • Hard limits remove power, enforce direction • Hard stops for critical components • Sacrifice gears and motors to protect optical elements SALT PFIS Preliminary Design Review Control System

  11. Control System Interfaces • PFIS interfaces • Etalons: this interface will disappear as the etalon assemblies are integrated into PFIS. • Detector and controller: mechanical, electrical, cryogenic, control, and data interfaces • Telescope: operations interface, bi-directional flow of commands and data SALT PFIS Preliminary Design Review Control System

  12. Observatory-level Control • Queue-efficient observing requires careful design • Automated observing, driven by scripts • Operator can not be expected to micromanage PFIS • Instrument-centered: PFIS is not hanging off the telescope; rather, the telescope is hanging off PFIS • The top-level interface in SALT is the silicon surface of the CCD; everything else is a subsystem • PFIS reaches out for services, which are provided quickly, deterministically, and in a closed loop • Telescope and Detector interfaces are critical: during slit mask peakup, the move/expose/centroid loop must be fast and dependable SALT PFIS Preliminary Design Review Control System

More Related