1 / 4

Melt flow index tester | Perfectgroupindia

The flow characteristics of thermoplastic materials like polyethylene and polypropylene are measured using a melt flow index tester (MFI). Other names for it include melt index (MI) tester and melt flow rate (MFR) tester. Numerous businesses in Maharashtra sell or rent MFI testers and provide calibration and maintenance services. In the plastics sector, the MFI value is a crucial indicator for product development and quality assurance.<br>Visit:- https://www.perfectgroupindia.co.in/melt-flow-index-tester.php<br>

perfectgroupindia7686
Download Presentation

Melt flow index tester | Perfectgroupindia

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Melt flow index tester A melt flow index tester is a device used to measure the melt flow rate (MFR) of thermoplastics. It is an important tool in the plastic manufacturing industry, as the MFR of a plastic resin is a key factor in determining its processability and performance.

  2. Features of Our Product Temperature Control: A melt flow index tester is equipped with a heating chamber, which heats the plastic resin to a specific temperature. The temperature is critical in determining the MFR of the resin, and the tester should have a precise and stable temperature control system. Pressure Control: The pressure exerted on the resin during the test is also crucial in determining the MFR. A melt flow index tester should have a precise and consistent pressure control system to ensure accurate results. Capillary Tube: The capillary tube is an essential component of the melt flow index tester, as it determines the flow rate of the molten resin. The tube should be made of a material that is resistant to high temperatures and pressure and should have a consistent diameter. Timer: The timer is used to measure the amount of resin that flows through the capillary tube in a specific time, usually 10 minutes. The timer should be accurate and reliable to ensure precise results.

  3. Automatic vs. Manual: Melt flow index testers can be either manual or automatic. Manual testers require the operator to load the resin and start the test manually, while automatic testers are fully automated and can perform multiple tests in quick succession. Automatic testers are generally more efficient and accurate than manual testers. Safety Features: Safety features are essential in any laboratory equipment, and melt flow index testers are no exception. Some safety features include automatic shut-off systems, pressure relief valves, and emergency stop buttons.

  4. For Quick Information Please Visit Our Website In conclusion, a melt flow index tester comes with various features that are crucial in determining the MFR of thermoplastics accurately. Contact Us! +91 9650480777 sales@perfectgroupindia.co.in www.perfectgroupindia.co.in

More Related