1 / 4

Parameter Decisions

Parameter Decisions. amt_strobe_select = 2 (no data clock) all units once at the startup – yes! csm_supp_idle_cycle = 1 on all units MROD wants null cycles? – yes! csm_incl_sync_stat = 1 for diagnostics status bits in the spacer word Should MROD log changes? – to be studied!

portia
Download Presentation

Parameter Decisions

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Parameter Decisions • amt_strobe_select = 2 (no data clock) • all units once at the startup – yes! • csm_supp_idle_cycle = 1 on all units • MROD wants null cycles? – yes! • csm_incl_sync_stat = 1 for diagnostics • status bits in the spacer word • Should MROD log changes? – to be studied! • csm_ttc_prom = 1 reload TTC – yes!

  2. More Parameters • gol_use_conf_regs = 0 • a must if no JTAG to GOL chip – yes! • csm_gol_ld1 = 0 and csm_gol_ld0 = 0 • selects 5.8ma for the laser diode current • can we use this one value? – yes! • csm_gol_pll = 0 to get 10ma pll current? • only use this value – yes!

  3. BCR and ECR Timing • At what time will the BCR be issued • at first trigger time -12 – yes! • First allowed trigger to be BCID=1 – yes! • Is choice difficult for CSM/MROD – not much! • Revisit, so all know, 2 tick requirement between BCR, ECR, and triggers! • How often in turns count & where with respect to BCR will ECR be issued?

  4. BCR Timing

More Related