1 / 8

Requirements for Next Generation mmWave Systems

Requirements for Next Generation mmWave Systems. Authors:. Date: 2014-01-21. Abstract. This presentation discusses application requirements for next generation mmWave wireless systems. Current state of 802.11ad. 802.11ad provides for up to 7 Gb/s at low power

quincy
Download Presentation

Requirements for Next Generation mmWave Systems

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Requirements for Next Generation mmWave Systems Authors: • Date:2014-01-21 James Gilb, Tensorcom

  2. Abstract • This presentation discusses application requirements for next generation mmWave wireless systems. James Gilb, Tensorcom

  3. Current state of 802.11ad • 802.11ad provides for up to 7 Gb/s at low power • There is a complete SoC with < 250 mW peak power • Commercially available implementations with up to 4 Gb/s • Multiple vendors have announced products or product development • Small form factor • Complete implementation including antennas in < 12 mm x 12 mm • 802.11ad complements 802.11ac in mobile devices • 802.11ad offers low power, small form factor for short range • 802.11ac provides legacy compatibility and better performance than 802.11n • Fast session transfer allows seamless 802.11 experience James Gilb, Tensorcom

  4. Applications • Mobile applications are expanding area • Billions of devices every year • Tablets and smart phones will be volume leaders • Wireless connectivity enables these devices • Mobile devices have different constraints • Small form factor required • Limited room for antennas • Restricted peak and average power available • Backwards compatibility is a key factor • Build on existing infrastructure with 802.11a/b/g/n James Gilb, Tensorcom

  5. High-speed Wireless Applications • One of the key applications is to cut the cable • Data rates for cables keep increasing: • USB • 3.0 – 4 Gb/s, full duplex (5 GS/s with 8b/10b coding) • 3.1 – 8 Gb/s, full duplex (bonds 2 channels) • Thunderbolt • 1 – 10 Gb/s, full duplex (10.3125 GS/s with 64b/66b coding) • 2– 20 Gb/s, full duplex (bonds 2 channels) • Uncompressed video • 1080p, 24 bit, 60 Hz – 3 Gb/s • 4k, 24 bit, 60 HZ – 12 Gb/s James Gilb, Tensorcom

  6. New requirements • Build on 802.11ad’s current success • Higher data rates - > 40 Gb/s throughput • MIMO • Channel bonding • Enable lower power modes • Evaluate modulation for peak power reduction • Low power SC mode is an example • Improvements for average power reduction James Gilb, Tensorcom

  7. Conclusions • Mobile devices and applications are increasing rapidly • Wired connectivity speed is continuing to increase • Wireless needs to keep up • 802.11 should start looking at the next generation of mmWave systems James Gilb, Tensorcom

  8. Straw poll • What should be the next data rate for 802.11 in the 60 GHz band? • 20 Gb/s • 40 Gb/s • 100 Gb/s • No new work in 60 GHz band James Gilb, Tensorcom

More Related