1 / 8

TECH FAIR

TECH FAIR . Jacques. INTRODUCTION. We are making a simple robot that is small and easy to make. The design is very basic and doesn’t allow it to do anything special. The only problem with it is that we are unable to control it , but we hope to make it controllable.

remy
Download Presentation

TECH FAIR

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. TECH FAIR Jacques

  2. INTRODUCTION • We are making a simple robot that is small and easy to make. The design is very basic and doesn’t allow it to do anything special. • The only problem with it is that we are unable to control it , but we hope to make it controllable. • We also are planning to make 20 of them and put them on a race track. • On the other hand we were going to make a laser lighter burner. • But we decided not to do it due to the safety reasons .

  3. Bristol Bot

  4. Cheap laser lighter burner

  5. materials • The materials required are • 10 tooth brush heads • 20 batteries • 10 cell phone vibrators • Double sided tape • Stickers (to decorated) • Paint(to decorate)

  6. design batteries Cell phone vibrator Double sided tape \ tooth brush head

  7. Final idea • Our final idea is to make the bristle bots because it is the most easiest thing that we could make and the parts required are not hard to get or expensive. • Also it is simple to make and also creative , and finally it is fun to make and attracts the attention of others.

  8. The end.

More Related