NUUO Bridge Remote Setting

1. NUUO Bridge Remote Setting

2. Overview • NUUO Bridge Remote introduction • Remote Access : Domain • Remote Access : Workgroup

3. NUUO Bridge Remote Introduction Step : • 1.Start up the Bridge for v 1.0.2 • 2. Press Settings and select remote • 3.There are two types for remote connection: • Domain • WorkGroup

4. Remote Access : Domain • When select Domain for remote access to Lenel Onguard , you only need to enter the IP only . • Please follow the instructions : • 1) Start > Right Click Computer >Properties • 2) Click Advanced System Settings on the left • 3) Go to the Computer Name tab • 4) Click Change next to “Rename this computer etc “ • 5) Check the box for Domain , not Workgroup . Type your domain name then press OK. • Note :You might have to enter the details of an Administrator account and you will have to restart the computer .

5. Domain : System Setting

6. Domain :Domain name Change

7. Domain: Log in with AD Username/Password

8. Remote Access : Workgroup • When select Workgroup for remote access to Lenel Onguard , you need to enter the IP & username / Password • Please follow the instructions : • 1) Start > Right Click Computer >Properties • 2) Click Advanced System Settings on the left • 3) Go to the Computer Name tab • 4) Click Change next to “Rename this computer etc “ • 5) Check the box for Workgroup . Type “Workgroup “ then press OK.

9. Workgroup : System Setting

10. Workgroup : Change name

11. FAQ

12. Remote Onguard Configuration requirement • 1) AllowWMI passWindows Firewall • Close Windows Firewall directly • Refer to the link below for section「In Windows Firewall, ...」： • http://www.sitepoint.com/php-wmi-dig-deep-windows-php/ • 2) Query Device successfully ，but can not connect to OnGuard • Refer to the link below for section :「To grant DCOM remote access permissions」 • http://msdn.microsoft.com/en-us/library/aa393266

13. Thank you!