1 / 25

How to Configure Video Client

How to Configure Video Client. This presentation is intended to guide the installer step by step through the Video Client installation. Installing and Operating VDClient. Installing the Video Client Application on the DCN Control PC Installing the Video Client Application on another PC.

rico
Download Presentation

How to Configure Video Client

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. How to Configure Video Client • This presentation is intended to guide the installer step by step through the Video Client installation. DCNNG VC IO

  2. Installing and Operating VDClient • Installing the Video Client Application on the DCN Control PC • Installing the Video Client Application on another PC. DCNNG VC IO

  3. Installing VDClient on the DCN Control PC • Requirements: • DCNNG software already installed on the PC • LBB4184 (Video Display Software Module) • ClientSetup.exe DCN Control PC LBB4184 ClientSetup.exe DCNNG VC IO

  4. Step 1 Install LBB4184 LBB4184 DCNNG VC IO

  5. Step 2 Install the ClientSetup.exe DCNNG VC IO

  6. Step 3 Start the DCNNG software • Choose the desired applications • Don’t forget to choose the Video Display Application! • Start the applications DCNNG VC IO

  7. Step 4 Start VDClient • VDClient is located in the programs list in the Windows Start menu DCNNG VC IO

  8. Menu F12 • When starting the application for the first time you will come automatically in the configuration window. • Choose Program runs on DCN Operator PC. • If needed adjust also other settings and click OK DCNNG VC IO

  9. End of Installing Video Display Software on a Server PC • End of this section. DCNNG VC IO

  10. Installing VDClient on another PC • Requirements : • DCNNG software already installed on the DCN Control PC • LBB4184 (Video Display Software Module) • ServerSetup.exe • ClientSetup.exe • TCP/IP protocol must have been installed at both PC’s • Both PC’s must be in the same workgroup DCN Control PC LBB4184 ServerSetup.exe VDClientPC ClientSetup.exe TCP/IP DCNNG VC IO

  11. Step 1 Set IP address of DCN Control PC DCNNG VC IO

  12. Step 1 Set IP address of DCN Control PC • The IP addres of the DCN Control PC must be set to 192.168.100.1 DCNNG VC IO

  13. Step 2 Set Subnet mask of DCN Control Control PC • The Subnet mask of the DCN Control PC must be set to 255.255.255.0 DCNNG VC IO

  14. Step 3 Set IP address of the client PC DCNNG VC IO

  15. Step 3 Set IP address of the client PC • The IP addres of the DCN Control PC must be set to 192.168.100.2 DCNNG VC IO

  16. Step 4 Set Subnet mask of the Client PC • The Subnet mask of the other PC must be set to 255.255.255.0 DCNNG VC IO

  17. Technical Tips • If more client PC’s have to be installed the same steps have to made also for those PC’s. • Each client PC must have a unique IP address • IP address 192.168.100.x ( x = decimal value) • All PC’s must have the same Subnet mask 255.255.255.0 DCNNG VC IO

  18. Step 5 Install LBB4184 LBB4184 DCNNG VC IO

  19. Step 6 Install ServerSetup.exe on the DCN Control PC DCNNG VC IO

  20. Step 7 Install ClientSetup.exe on the client PC DCNNG VC IO

  21. Step 8 Start the DCNNG software • Choose the desired applications • Don’t forget to choose the Video Display Application! • Start the applications DCNNG VC IO

  22. Step 9 Start VDServer on the DCN Control PC • VDServer is located in the programs list in the Windows Start menu DCNNG VC IO

  23. Step 10 Start VDClient on the Client PC • VDClient is located in the programs list in the Windows Start menu DCNNG VC IO

  24. Menu F12 • When starting the application for the first time you will come automatically in the configuration window. • Choose Program runs on an external PC. • Fill in the Network name of the DCN PC • If needed adjust also other settings and click OK DCNNG VC IO

  25. How to Configure Video Client End of section Main Menu DCNNG VC IO

More Related